Tailpipe Comparisons

Georgie · May 29, 2007

I need new tail pipes, I often see coups and verts with very nice 2.5 " tailpies, but no one ever post what make they are running.. My regards to tailpipes are that they should be very shinny ( the section that is visible to the eye ) and fit well. If any of you guys have some pictures ( with description ) of your tailpipes please post them.

When I shop online I cant get a good visual of the tailpipes, and I am dying to order some this week.

Any pics would be a great help!

Thanx

onefstsnake · May 29, 2007

I run the flowmaster american thunder cat back.

Their tailpipes fit really well and provide a ton of clearance for the tires.
Im running a 275/60/15 and there is at least 1" of clearance around the tire and the pipes are about 1" from the gas tank cover as well.

85_SS_302_Coupe · May 29, 2007

MAC actually make pretty nice tail pipes, as do Flowmaster. They're about the only 2 i've dealt with.

Georgie · May 29, 2007

are they shinny? stainless chrom??and how much of it is shinny..up untill the bend when ot goes over the axle assembly?

monte87 · May 29, 2007

Georgie said:
are they shinny? stainless chrom??and how much of it is shinny..up untill the bend when ot goes over the axle assembly?

Dude you can make anything shiny with enough brillo, sandpaper and white rouge!

Ant

Trefty · May 29, 2007

Georgie said:
are they shinny? stainless chrom??and how much of it is shinny..up untill the bend when ot goes over the axle assembly?

The MAC ones I've got are stainless steel, very shiny when polished and are stainless from the bend right over the rear axle. The only downside I have with them are that the tail pipe and tube coming from the mufflers are two seperate pieces and there is a big ugly clamp that attaches them. I've hidden the clamp mostly but from the side you can still see where the two pipes attach. Not a huge deal at all though. I'll try to post some pics for you later.

BigHairyMonkey · May 29, 2007

i have a Pypes Stainless Steel catback w/ welded in flows. It looks gorgeous see below.

85_SS_302_Coupe · May 29, 2007

Most of the MACs that i've seen were just chromed steel, and a lot of Flowmasters are polished stainless.

Georgie · May 29, 2007

trefty, where did u get them from??

Georgie · May 29, 2007

and to my belief the two piece tail pipes can be better fit..because of the way they are joind together. no?

85_SS_302_Coupe · May 29, 2007

Georgie said:
and to my belief the two piece tail pipes can be better fit..because of the way they are joind together. no?

I like how MAC separates theirs at the axle, that way you can adjust them both at the back of the muffler and from the axle back. This allows you to make sure you have axle clearance, and you get to tuck them up to the bumper and get them even and all that.....because there's NOTHING worse (aside from maybe hood gap) than uneven tail pipes.

Trefty · May 29, 2007

85_SS_302_Coupe said:
I like how MAC separates theirs at the axle, that way you can adjust them both at the back of the muffler and from the axle back. This allows you to make sure you have axle clearance, and you get to tuck them up to the bumper and get them even and all that.....because there's NOTHING worse (aside from maybe hood gap) than uneven tail pipes.

I've spent hours trying to get mine properly adjusted and they're still a bit off. Not too noticeable, but I know they are so it drives me crazy! I just need to set aside some time to make them 100%.

Georgie, I bought my cat-back from a place called The Mustang Shop up here in Canada. Here's the link:http://www.themustangshop.ca/site/cat_viewpart.php?PartNumber=VEs3OTk1

Trefty · May 29, 2007

Trefty said:
I've spent hours trying to get mine properly adjusted and they're still a bit off. Not too noticeable, but I know they are so it drives me crazy! I just need to set aside some time so I can make them 100%.

Georgie, I bought my cat-back from a place called The Mustang Shop up here in Canada. Here's the link:http://www.themustangshop.ca/site/cat_viewpart.php?PartNumber=VEs3OTk1

wrenchbender · May 29, 2007

Maybe i,m just an old man. My 89 had 21/2 in pipes with what looked like Flowmasters when I got it. I couldn,t stand the noise. I took the whole cat back systems off & put on stock parts. It,s a lot quieter then it was but still more noise than I want. I,d like to put a single system on it but I wouldn,t do that to a v-8.

Georgie · May 29, 2007

u got the whole cat back system?? im just looking for tail pipes..i love my mufflers...

Trefty · May 29, 2007

Georgie said:
u got the whole cat back system?? im just looking for tail pipes..i love my mufflers...

Yea, I bought the whole cat-back plus the off-road x pipe. You can buy the tubes from the mufflers back off of MAC's website but I don't know if they'd bolt up to the system youve got.

ACSPONY · May 29, 2007

Flowmaster c/b here

The pipe is shinier than the picture shows, but you get an idea of how much of the tailpipe you can see.

Tailpipe Comparisons

Georgie

New Member

onefstsnake

New Member

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

Georgie

New Member

monte87

Trefty

Member

BigHairyMonkey

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

Georgie

New Member

Georgie

New Member

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

Trefty

Member

Trefty

Member

wrenchbender

New Member

Georgie

New Member

Trefty

Member

ACSPONY

Similar threads

Tailpipe Comparisons

New Member

New Member

it sucks (I know) to be on the receiving end

New Member

Member

it sucks (I know) to be on the receiving end

New Member

New Member

it sucks (I know) to be on the receiving end

Member

Member

New Member

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency