tci streetfighter Q.

[pistonhead351]

we just got done rebuilding my brothers aod, we put a tci 3000 stall streetfigter in and a shift kit. my question is, it only brake stalls to about 2300 or so rpm's. i just thought it should be a lil more than that. would throttle valve adjustment be the cause of this? we took it to the track yesterday and it ran a 14.60 with just gears, stall, e-cam and exhaust. is that about right? that was with a 2.11 60ft launching at about 1600-1900 rpms if we went any higher it would just spin the bald kumhos.

 

[pistonhead351]

anyone?

 

[Lyncher]

Im gonna say that it should probably run faster than that but the bald kuhmos couldnt have helped. I think you should probably be launching at a lower rpm with the stall (more like 1000) but i could be wrong... what gears does it have and what body type?

 

[pistonhead351]

4:10s and its a hatchback gt

 

[Lyncher]

4:10s and its a hatchback gt

Im no expert but im gonna say with those gears and the stall those 60's should be down quite a bit... but someone please correct me if im wrong