• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

TCP Strut Rods?

  • Thread starter Thread starter wickedmach1
  • Start date Start date Jul 4, 2006
W

wickedmach1

New Member
Apr 8, 2003
376
0
0
Austin, TX
Jul 4, 2006
#1
  • Jul 4, 2006
  • #1
I am thinking to add the TCP strut rods to my 1970 Mustang. I have the upper and lowers TCP arms and spring perches with ball bearings. TCP claims there strut rods help with alignment and increase caster adjustments. My car is being built from ground up and I am now starting on the suspension. Are these rods worth the money? Are the stock rods as good as the TCP's with rubber bushings? Thanks.
 

Route666

Active Member
Aug 16, 2003
1,652
6
39
Brisbane, Australia
Jul 5, 2006
#2
  • Jul 5, 2006
  • #2
If you used their lower control arms as well you can adjust caster a whole lot more as it has a spherical bearing.

Their new strut rod design has a nice feature which may not be noticeable, but is technically more correct - it centres the pivot axis in the middle of the mounting point unlike other spherical bearing designs.
 
W

wickedmach1

New Member
Apr 8, 2003
376
0
0
Austin, TX
Jul 5, 2006
#3
  • Jul 5, 2006
  • #3
Is the strut rod upgrade worth the $369? Will I see a differece from my stock rods? If so, it what way? Thanks.
 

Route666

Active Member
Aug 16, 2003
1,652
6
39
Brisbane, Australia
Jul 6, 2006
#4
  • Jul 6, 2006
  • #4
If you're after a stock buildup with cruising capabilities then there's no point to getting them really. The ride may be a little better as some binding is removed, but it's probably negligable.

If you're after a performance build - they are one of the things than can remove binding, so they would be well worth it. The roller perch would go together with this in freeing up the suspension, and these two mods along with the shelby drop would give you a nice upgrade over a stock suspension setup.

Harder springs are going to make the ride harsher but increase the performance of the suspension, but don't forget adequate shocks to match them or you'll end up with a car that bounces, which gives a hard ride and reduces traction.

Tubular arms are probably the next upgrade, they allow the suspension geometry to remain consistant under more harsh conditions - when driving hard.

Further on from this - TCP's arms allow camber and caster adjustment as well.

Coil-overs are going to increase the quality of the ride while maintaining suspension performance or maintain ride quality while improving performance, depending on spring and damping rates you select.
 

SoCalCruising

Founding Member
Jul 25, 2000
2,437
0
47
SoCal
Jul 6, 2006
#5
  • Jul 6, 2006
  • #5
Increased pos. caster is important for good high-speed handling. What an alignment shop will likely do is to shorten the strut rod (moves lower ball joint forward and increases caster) and then fine-tune the caster setting by adjusting the length of the forward or rear arm of the UCA, individually (I assume you UCAs are adjustable). This moves the upper ball joint either forward or rearward. You don't want to do it all with the UCA. The car will run very predictably with more pos. caster and the wheel will tend to return to center better.
 
W

wickedmach1

New Member
Apr 8, 2003
376
0
0
Austin, TX
Jul 6, 2006
#6
  • Jul 6, 2006
  • #6
Thanks for the great information. The list of parts that I already have are listed below. I am building a street driven car which will occassionally be driven at the track. Is there a weak link or anything I need to do differently to make a solid handling weekend cruiser?

Front:
TCP Upper and Lower Control Arms
Roller Spring Perches
620# Coil Springs
Koni Shocks
Shelby Drop

Rear:
4 1/2" Mid-eye Mustangs Plus Leaf Springs
Koni Shocks
 
R

RapidRoy

New Member
Nov 25, 2004
13
0
0
Jul 6, 2006
#7
  • Jul 6, 2006
  • #7
Your combo is good, huge improvement over stock. Get GOOD tires, they are your link to the road! Do some research on which ones would be good for your situation. Street Or Track also has strut rods for $300. I'm extremely happy with mine. Get a performane alignment afterwords. Do a search to get specifications if you need them.
 
W

wickedmach1

New Member
Apr 8, 2003
376
0
0
Austin, TX
Jul 6, 2006
#8
  • Jul 6, 2006
  • #8
I forgot to mention I will also be installing Caltracs traction bars.
 

Route666

Active Member
Aug 16, 2003
1,652
6
39
Brisbane, Australia
Jul 7, 2006
#9
  • Jul 7, 2006
  • #9
Sounds like a good sports-oriented build to me, I'd go the extra few hundred and add in the strut-rods for their freer movement and extra dimension of adjustment. While you can adjust castor with the upper arm, you can adjust TWO of castor, wheel position and strut-rod length if you get the adjustable SR as well.
 
You must log in or register to reply here.

Similar threads

Suspension Harsh Ride
  • PonyGTrider
  • Mar 20, 2026
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
62
Views
1K
Fox 5.0 Mustang Tech Apr 11, 2026
Noobz347
Fox Alignment Suggestions
  • PonyGTrider
  • Jul 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
421
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 13, 2025
PonyGTrider
N
Fox Street Suspension Build Advice
  • NYFox
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
292
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 28, 2026
Noobz347
C
Suspension Rear suspension help
  • Clark302
  • Aug 17, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
301
Fox 5.0 Mustang Tech Aug 17, 2025
Clark302
C
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
13
Views
392
SN95 V6 Mustang Tech Jun 8, 2026
joeybuddy96
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?