temper temper!!!!!!

stang_hp

Member

Feb 25, 2007

62

0

6

cartersville Ga.

Mar 20, 2007

#1

• Mar 20, 2007

• #1

anyone have any advice on what thermostat i should use when I build my engine? when it was a 306 I used a 160 and it tended to run hot when at idle sitting in traffic for a while. ( engine build specs in my sig)

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Mar 20, 2007

#2

• Mar 20, 2007

• #2

I'd try to stick with a 180*F t-stat and fix the issue that was causing the car to run hot.

For instance, running hotter while stationary or going very slow, but cooling down once at speed can indicate a cooling fan issue. You might end up renewing some components to keep things up to par.

Good luck.

 

stang_hp

Member

Feb 25, 2007

62

0

6

cartersville Ga.

Mar 20, 2007

#3

• Mar 20, 2007

• #3

the electric fan is new maybe I need a better radiator. or do you think the 160 just stayed open too much and didnt have a chance for the fan to cool the fluid?

 

TheBocSez

New Member

Feb 3, 2004

652

0

0

Converse, TX

Mar 20, 2007

#4

• Mar 20, 2007

• #4

Never used one, but have read a lot of horror stories about th FAL electric fans. could be part of your issue.

I also stick with a 180. My volvo fan, DC controller, and parts store 3 core keep my car at a constant 180-190 all year long.

 

stang_hp

Member

Feb 25, 2007

62

0

6

cartersville Ga.

Mar 20, 2007

#5

• Mar 20, 2007

• #5

I think I will try the 180.

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Mar 20, 2007

#6

• Mar 20, 2007

• #6

Underdrive pulleys (if you have them) and a too small radiator are definitely some of the possible sources of the problem. Since your car doesn't overheat when you are moving, the radiator drops down several places in the probable cause list.

The radiator has about 19" vertical surface, so a 16" fan leaves 1.5" top and bottom uncovered , plus what it doesn't cover on the sides. I would look for a larger fan that covers more of the radiator.

 

stang_hp

Member

Feb 25, 2007

62

0

6

cartersville Ga.

Mar 20, 2007

#7

• Mar 20, 2007

• #7

Thanks for the info, I dont want to harm my new engine.

 

vristang

15 Year Member

Mar 31, 2005

4,933

101

124

Seattle

Mar 20, 2007

#8

• Mar 20, 2007

• #8

There has been a ton of experience posted here already, but here is my .02

I run a stock stat 195F.

It sounds like airflow is your issue, so a new fan should help...

let us know how it goes...
jason

 

montegoman351

Member

Jan 12, 2007

169

1

18

Mar 20, 2007

#9

• Mar 20, 2007

• #9

Run to O'Reillys and order a Mr.Gasket High-Flow thermostat. They'll have to look in a catalog, but it is a great investment and keeps my car cool.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,297

18,002

224

Massachusetts

Mar 20, 2007

#10

• Mar 20, 2007

• #10

Run the stock 195 t-stat. If you want to go lower, the lowest i would go is 180*.


EFI cars run better hotter, running a colder t-state is a holdover from the carbed days. If you have cooling issues, you need to address them and not baid-aid them with a cooler t-stat

 

Bad92GT

The 5 Minute Plan Man

Jun 10, 2004

492

0

0

SC

Mar 20, 2007

#11

• Mar 20, 2007

• #11

Mustang5L5 said:

EFI cars run better hotter

Click to expand...

if that aint the truth.. man my old car was night and day difference.. i'd hit the kill switch on the fan, let it get to about 215 ish.. heat em up, and launch, and the car was ALOT better.. i suggest stock stat to.. you actually give way to hurting the motor with a 160 stat.. simply because they werent designed for it

 

4G-KDMP

10 Year Member

Jul 23, 2005

935

19

39

CA

Mar 20, 2007

#12

• Mar 20, 2007

• #12

180 is my choice

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Mar 20, 2007

#13

• Mar 20, 2007

• #13

The stat rating isnt all that important compared to what temp the car runs at. If a 180 keeps someone under 220*F, that's what it takes. As components are replaced and temps come down, a simple stat swap is easy. MHO.

 

Black1987Stang

Active Member

Aug 22, 2004

1,422

0

37

Jersey Shore

Mar 21, 2007

#14

• Mar 21, 2007

• #14

Mustang5L5 said:

Run the stock 195 t-stat. If you want to go lower, the lowest i would go is 180*.


EFI cars run better hotter, running a colder t-state is a holdover from the carbed days. If you have cooling issues, you need to address them and not baid-aid them with a cooler t-stat

Click to expand...

I agree, dont go lower than 180. I'm running a stock 195 with a STOCK radiator, fan (clutch locked up on me), shroud, water pump and all. With heads, cam, intake gears, etc too, in a cool day it settles at exactly 195 on my Autometer gauge, on a Hot NJ day it will CREAP up to highest ive seen was 203-205 in hot idling traffic.

I would do a full system flush etc.....might help out with that.

BTW I have a taurus 3/8l elec fan if ur or someones interested.

 

daddystang

New Member

Aug 13, 2006

185

0

0

Mar 21, 2007

#15

• Mar 21, 2007

• #15

I have a 306 also, with a 3row ford radiator, 180 t-stat, stock fan and shroud, and cobra water pump pulley. My temperature runs around 175 while moving, and also creaps up to 200+ when sitting in traffic on a warm day. I got a lot of great feed back in the past about this, and everyone seemed to think a good e-fan would be the answer. I'm saving up for a dccontrol fan. Good luck to you, keep us informed, and I'll do the same.