I need to replace my tensioner pulley but I can't figure out how to release the tensioner arm. I assume I have to release the spring pressure in the arm before I take off the pulley, but how do I do it?
Remove the belt, then remove the bolt that holds the pulley on the tensioner arm. Caution!!! The bolt through the center of the pulley has a LH thread. Turn it clockwise to loosen it. I stripped the thread in mine trying to replace the pulley because I didn't know that it was a LH thread. I ended up spending $73 at NAPA for a new tensioner assembly.
Use an 18 MM socket on a extra long breaker bar or ratchet on the pulley mount bolt. When you pull counter clockwise on the breaker bar, it release tension on the belt.