• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

TFS 1 vs B303

  • Thread starter Thread starter BYRDPE
  • Start date Start date Nov 16, 2007
B

BYRDPE

Founding Member
Nov 4, 1998
1,556
0
37
Memphis,Tn.
Nov 16, 2007
#1
  • Nov 16, 2007
  • #1
I'm running the B cam with my present combo.
I have it advanced 4 degrees and it has good bottom end and really comes on at 3K- 5K.
I am curious to knoe how the TFS1 would change my engine charactistics.
Anyone tried both in the same combo?
What rpm range does the TFS make power?
Thanks
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Nov 16, 2007
#2
  • Nov 16, 2007
  • #2
My TFS1 has pretty much no bottom end, but you have an intake that will promote low end torque, so you should be in better shape than me. I'd think with it advanced 4° like you have the B cam, you'd make some pretty decent power. FWIW, my stage 1 cam pulls all the way to redline, and feels like it's got a good amount left to go. It doesn't make any power until after 3K though.
 

the pony boy

Founding Member
Apr 19, 2002
358
0
16
10512
Nov 16, 2007
#3
  • Nov 16, 2007
  • #3
tfs stg1 auto and 410's and love it.will be putting the same cam in my other fox. phil
 
B

BYRDPE

Founding Member
Nov 4, 1998
1,556
0
37
Memphis,Tn.
Nov 16, 2007
#4
  • Nov 16, 2007
  • #4
StangGT1995 said:
My TFS1 has pretty much no bottom end, but you have an intake that will promote low end torque, so you should be in better shape than me. I'd think with it advanced 4° like you have the B cam, you'd make some pretty decent power. FWIW, my stage 1 cam pulls all the way to redline, and feels like it's got a good amount left to go. It doesn't make any power until after 3K though.
Click to expand...
Ok...thanks for the info.
Judging from your post if I was to run the TFS1 looks like I'd advance it also. I kinda like the lowend grunt on the streets.
So in essence the TFS1 would be almost the same as the B.
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Nov 16, 2007
#5
  • Nov 16, 2007
  • #5
I feel that the TFS cam would actually work well in your case the TFS1 cam was designed by TFS to work with their heads that have some of the best low lift numbers in the biz. Your Thumpers are kind of ported for the same purpose to help the low lift so I think I would give it the nod and and up the rears to 4.10's. It amazes me the number of people that run this cam with stock heads that have about the worst low lift numbers on earth is it just because of the lift specs people run this camshaft on stockers?
 
B

BYRDPE

Founding Member
Nov 4, 1998
1,556
0
37
Memphis,Tn.
Nov 16, 2007
#6
  • Nov 16, 2007
  • #6
PUNISHER RACING said:
I feel that the TFS cam would actually work well in your case the TFS1 cam was designed by TFS to work with their heads that have some of the best low lift numbers in the biz. Your Thumpers are kind of ported for the same purpose to help the low lift so I think I would give it the nod and and up the rears to 4.10's. It amazes me the number of people that run this cam with stock heads that have about the worst low lift numbers on earth is it just because of the lift specs people run this camshaft on stockers?
Click to expand...

Thanks for the reply.
So 4.10 to help the low and retain the top end the TFS1 provides.
It amazes me the number of people that run this cam with stock heads that have about the worst low lift numbers on earth is it just because of the lift specs people run this camshaft on stockers?
Click to expand...
Just curious to what you mean by this.
Would these ppl see any gains or does it hurt performance with stock heads?
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Nov 16, 2007
#7
  • Nov 16, 2007
  • #7
the ramps and profile of that camshaft was designed to accentuate the high flow at low lift design of TFS heads dont get me wrong the camshaft will work in a stocker 302 but you would not get the full effect of the camshafts intentions.
 
B

BYRDPE

Founding Member
Nov 4, 1998
1,556
0
37
Memphis,Tn.
Nov 16, 2007
#8
  • Nov 16, 2007
  • #8
PUNISHER RACING said:
the ramps and profile of that camshaft was designed to accentuate the high flow at low lift design of TFS heads dont get me wrong the camshaft will work in a stocker 302 but you would not get the full effect of the camshafts intentions.
Click to expand...
Gotcha....
 
D

Deleted member 87397

Nov 16, 2007
#9
  • Nov 16, 2007
  • #9
Hey I've got a new TFS 1 just sitting on the shelf I need to get rid of. If you are interested send me a PM and i'll hook you up.
 

ShortThrow50

Member
Oct 22, 2006
923
2
16
Pa
Nov 17, 2007
#10
  • Nov 17, 2007
  • #10
My TFS1 cam isnt advanced at all and I have plenty of low end. Are you guys talking about big loss of low end using these cams with stock heads
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Nov 17, 2007
#11
  • Nov 17, 2007
  • #11
I can't guarantee that my loss of low end isn't related to my intake choice as well. I'm running the Typhoon, which is a copy of the original Edelbrock Performer RPM. Don't get me wrong, my car will blaze the tires if I side step the clutch, but in my application, the low end just isn't there to me.
 
You must log in or register to reply here.

Similar threads

Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
486
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
G
Drivetrain trickflow Stage 3 camshaft 347 stroker. also too much gear????
  • Gross Virgin
  • May 2, 2024
  • Fox 5.0 Mustang Tech
Replies
0
Views
905
Fox 5.0 Mustang Tech May 2, 2024
Gross Virgin
G
R
1974 Datsun 620 pickup / 5.0L HO
  • RJH46
  • Aug 24, 2025
  • Other Auto Tech
Replies
1
Views
423
Other Auto Tech Aug 24, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?