TFS TW heads and Crane cam users please help

R.J.

Member

Aug 20, 2003

813

0

16

Warwick, Rhode Island

Jun 5, 2006

#1

• Jun 5, 2006

• #1

Will TW heads work with a 2030 cam on a stock block? When I was researching the combo I wanted, I was under the impression the 2030 and 2031 were exactly the same except for 1.6 and 1.7 rockers respectively. Now that I look at the numbers, TW heads max lift is .540. The 2030 is .533 intake and .544 exhaust and the 2031 is .513 intake and .529 exhaust.

Now the 2031 is the 1.7 cam and the 1.7's would add @.04in of lift and again we would be over the TW max of .540.

What am I missing? I thought a lot of people ran these cams with this setup?

 

Grn92LX

Fidanza Man!

Founding Member

Jan 14, 2001

6,819

64

129

New York

Jun 5, 2006

#2

• Jun 5, 2006

• #2

The TW max lift is not .540. Thats the max lift the stock TW springs are rated to handle.

I've ran .547/.536 with .020" milled TW heads on a stock block. 6200 rpm, no problems. But we all know @ .050" lift is meaningless in terms of piston to valve clearance.

 

R.J.

Member

Aug 20, 2003

813

0

16

Warwick, Rhode Island

Jun 5, 2006

#3

• Jun 5, 2006

• #3

So what your saying is I am good to go?! It will be ok?

 

trickstang94

New Member

Nov 17, 2004

80

0

0

CA

Jun 5, 2006

#4

• Jun 5, 2006

• #4

Go big or go home, Ray.

 

Joes95GT

New Member

Jan 23, 2003

3,132

1

0

Delaware

Jun 5, 2006

#5

• Jun 5, 2006

• #5

R.J. said:

So what your saying is I am good to go?! It will be ok?

Click to expand...

What he's saying is get a set of better springs to take complete advantage of the camshaft. That is probably some of the best 100 bucks you could possibly spend. Trust me.

That's what he's saying.

Joe

 

R.J.

Member

Aug 20, 2003

813

0

16

Warwick, Rhode Island

Jun 5, 2006

#6

• Jun 5, 2006

• #6

So in summary: .540 is the max "recommended" lift for the stock TW springs. .540 is NOT the max lift for good piston to valve clearance with a stock block. So with or without the spring upgrade, I am good!!

Thank you and I will look into the spring upgrade.

 

OrangeMustangGt

Founding Member

Mar 7, 2002

1,976

0

36

Cape Cod, MA

Jun 5, 2006

#7

• Jun 5, 2006

• #7

the rated lift of the crane 2031 is assuming your using 1.7's i believe....it was a cobra replacement cam

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

Jun 5, 2006

#8

• Jun 5, 2006

• #8

i like my 2031, plenty of TQ

 

Grn92LX

Fidanza Man!

Founding Member

Jan 14, 2001

6,819

64

129

New York

Jun 6, 2006

#9

• Jun 6, 2006

• #9

Joes95GT said:

What he's saying is get a set of better springs to take complete advantage of the camshaft. That is probably some of the best 100 bucks you could possibly spend. Trust me.

That's what he's saying.

Joe

Click to expand...

Yep basically

Along with getting a real camshaft!

 

R.J.

Member

Aug 20, 2003

813

0

16

Warwick, Rhode Island

Jun 6, 2006

#10

• Jun 6, 2006

• #10

This setup is just to hold me over till I get my 331. First comes a house and then I will have a nice garage to do the eng swap in. The heads, valve train, and T-body were bought with the 331 in mind. The cam and cobra intake will only be use on my stock block with this set up. Since the cam is “just because“, I did not want to have to worry about piston to valve clearance with a big cam.
This is why I asked about the .540 of the TW heads, I got nervous for a sec. Thanks for explaining that I will be fine.