The black 2 piece projectors for 94-98 Rock!

reeber

10 Year Member

Mar 10, 2004

574

26

38

Berlin, NJ

Apr 17, 2006

#1

• Apr 17, 2006

• #1

These are, by far, the best aftermarket set of lights I've purchased. I'll post pics when I complete the installation, but the finish is great! No corners were cut, the lens is made of glass instead of brittle plastic. I'll let you know how the light projects. They are different type bulbs than stock, but they did come with a set of thier own. They aren't the greatest, but at least it's a start. These are the lights I am talking about:

View attachment 476081

 

M

mijo_latino

Active Member

Apr 16, 2004

179

1

29

Canton, Michigan

Apr 17, 2006

#2

• Apr 17, 2006

• #2

I like this stlying too. The fact that they still allow aiming beats the one peice hands down. Good luck with the output, im not sure if they've dealt with that issue.

I have the chrome APC ones and the output sucked. Upgraded to true HID's+projectors and improved 20X. If your not happy, you can just replace the lenses on those to improve the output. All that is required is to pry the glass off and a couple of screws and tabs and the lense just comes out. Reassamble with sealent and your done. Quality lenses go for cheap(~$45) on some HID forums. I really recommend this route. It will be night and day if your not happy with the beam spread...

 

four six

Member

Jan 19, 2006

506

2

18

Hobart, IN

Apr 18, 2006

#3

• Apr 18, 2006

• #3

pics of you stang with lights on it

 

SRT Handz

I tripped & fell down and cut myself & got blood

Oct 10, 2004

941

23

19

La Mirada, CA

Apr 19, 2006

#4

• Apr 19, 2006

• #4

I really wanna see what these look like on a car

 

reeber

10 Year Member

Mar 10, 2004

574

26

38

Berlin, NJ

Apr 19, 2006

#5

• Apr 19, 2006

• #5

Here's a picture of them... I know, bad picture... I'll get better ones and repost...

 

F

FalconGuy016

New Member

Oct 26, 2004

437

1

0

Northern VA

Apr 19, 2006

#6

• Apr 19, 2006

• #6

Hmmm... I think I would need clear corners as well to go with those lights (if I had this setup). That and they don't seem to fit that well to me IMO, but if you're happy that's all that matters

 

reeber

10 Year Member

Mar 10, 2004

574

26

38

Berlin, NJ

Apr 19, 2006

#7

• Apr 19, 2006

• #7

Don't judge this picture as how they fit. I have a broken header panel that is being replaced when the cervini front bumper is installed. With a straight header panel, the light lines up perfect. Also, this picture is before I adjusted them... The corner lens is what is out of wack. Not the headlight

 

reeber

10 Year Member

Mar 10, 2004

574

26

38

Berlin, NJ

Apr 19, 2006

#8

• Apr 19, 2006

• #8

Here's another picture of the whole car with the projectors...

 

padge

New Member

Apr 20, 2004

61

0

0

Saskatoon, SK, Canada

Apr 19, 2006

#9

• Apr 19, 2006

• #9

Nice car man, where do you get those projectors?

 

squares98

Member

Aug 20, 2004

852

0

17

Orange,ca

Apr 19, 2006

#10

• Apr 19, 2006

• #10

Ok time for a picture of the lights on at night.

 

deftsound

Please ask me how much my supercharger cost

Apr 6, 2004

945

1

39

Texas City TX

Apr 19, 2006

#11

• Apr 19, 2006

• #11

needs clearcorners asap

im not a big fan of the two piece (or 3 piece fox body) i remember on my fox those damn 3 piece ones never looked right

 

M

mijo_latino

Active Member

Apr 16, 2004

179

1

29

Canton, Michigan

Apr 19, 2006

#12

• Apr 19, 2006

• #12

those are clear corners.... the bulb is just being reflected.

Also, try out the highbeams, do they aim extremely to high to be any good?

 

reeber

10 Year Member

Mar 10, 2004

574

26

38

Berlin, NJ

Apr 20, 2006

#13

• Apr 20, 2006

• #13

Mijo, your right, they are clear corners... I was scratching my head after reading the posts thinking, "How much clearer do you want them?"... I got the lights at Mustangtuning. Free shipping! Anyway, I did try the high beams and the project perfectly after I adjusted them. I did try them before I adjusted them and they were WAY too high, but now they look good. If I have time tonight, I'll take some night shots with the lights on and show you the projectors and high beams...

 

SRT Handz

I tripped & fell down and cut myself & got blood

Oct 10, 2004

941

23

19

La Mirada, CA

Apr 20, 2006

#14

• Apr 20, 2006

• #14

I still dont think those projectors look right on a SN-95...still a little to ricer for me....i wish they made a really good looking one.........stockers still rock...they rock even more when they are new...like mine