Fox The Coolest Thing The Ups Man Has Ever Dropped Off Has Arrived

90lxcoupe · May 15, 2015

Title should read coolest thing the ups man has delivered to me, here it is, in all its glory, my new transmission, no more broken tremecs in my future.

This is what the inside looks like, not mine, a friends transmission he had to take apart for some service. If you notice, no one piece cluster shaft like a tremec transmission so in the event of a gear failure, all that needs to be done is pull the shaft out of, take a gear off of the shaft and replace it with a new one. The last time i broke 3rd gear in my tremec it took out a total of $1080 dollars worth of parts alone...

FoxMustangLvr · May 15, 2015

Looks awesome, congrats! The shifter looks like its off to the drivers side a little, will it line up in the hole correctly or is there a little cutting in your future?

90lxcoupe · May 15, 2015

Lots of cutting had already happened, Liberty sent me an empty mock up transmission so i could get the tunnel done while i was waiting..

The hole got much bigger to clear the linkage.

A5literMan · May 15, 2015

Is that their "pro shifted" version?

rdharper02 · May 15, 2015

After some debate about the next motor's power output, I am considering going with an auto. I had not thought about trying to use a Liberty or Lenco on the street. If you don't mind me asking, what do you have in it with the bell, clutch etc?

90lxcoupe · May 15, 2015

A5literMan said:
Is that their "pro shifted" version?

It is a face plated clutch assisted box, pro shifting transmissions is really a thing of the past, the pro shift dogs wear out and need to be replaced like a synchro would, but the faceplates are extremely durable and street driving really doesnt beat the lugs up at all.

rdharper02 said:
After some debate about the next motor's power output, I am considering going with an auto. I had not thought about trying to use a Liberty or Lenco on the street. If you don't mind me asking, what do you have in it with the bell, clutch etc?

Trans is 5500, bell is 6-900 depending on what you get and a clutch/flywheel is anywhere from 500-2000. Not cheap but realistically it is just under 2000 more than a fully loaded tremec from liberty and when you break a tremec once there goes the money that was saved. Liberty takes deposits so i paid that to get them started and you can make payments on it up until it is finished, i wouldnt have ever had the money all at once to do it but i worked a lot of OT to pay for this thing.

srtthis · May 15, 2015

welp... i have an erection again now...

mikestang63 · May 15, 2015

WOw. I haven't heard about Liberty 5 speeds since back in the 70's. That thing looks tough.

90lxcoupe · May 15, 2015

There are a few guys around the mustang world that switched to them. Ill be running this one as a 4 speed at the track, you cant get a overdrive 5th with a trans like this so we geared the transmission pretty steep on 1-4 and 5th will be the cruising gear, with a 3.27 rear

A5literMan · May 15, 2015

I was just on their site this past weekend looking at their upgraded tko 600 which was running just under 3k. I couldn't tell if it was faceplated or the old pro shift/dog ring setup. Congrats! Nice trans btw! I'm just not convinced I'll ever make enough power to quantify the extra expense personally. Even though it's what I want lol.

90lxcoupe · May 15, 2015

It doesnt take much to kill a tko. They can be really hit or miss and over 600 hp is starting to push the limit. A faceplated tko with all the options is around 3600 bucks. The have one that has carbon synchros that is around 2800 i think

A5literMan · May 15, 2015

90lxcoupe said:
It doesnt take much to kill a tko. They can be really hit or miss and over 600 hp is starting to push the limit. A faceplated tko with all the options is around 3600 bucks. The have one that has carbon synchros that is around 2800 i think

Yeah I was looking at the carbon synchro trans. At least they throw a Pro 5.0 shifter in the deal lol.

rdharper02 · May 16, 2015

Sounds good, I look forward to hearing how it works for you on the street.

NIKwoaC · May 16, 2015

Aw hell yea man that's awesome. You should post vids of you driving it on the street when done.

FoxMustangLvr · May 16, 2015

NIKwoaC said:
Aw hell yea man that's awesome. You should post vids of you driving it on the street when done.

@90lxcoupe , yes please post a video of hitting a Taco Bell drive thru like @84Ttop did, lol. Are you trying for Drag Week again?

90lxcoupe · May 16, 2015

Yea i am signed up for drag week. I think i can get everything done in time. We just bought a house too so it will be interesting trying to balance projects here and get the car done.

I still plan to drive this thing on the street as much as with the old transmission and will try to get a bunch of vids from dragweek

Fox The Coolest Thing The Ups Man Has Ever Dropped Off Has Arrived

90lxcoupe

FoxMustangLvr

I love my Pimp

90lxcoupe

A5literMan

At least it is lumpy...

rdharper02

like kicking myself in the junk

90lxcoupe

srtthis

the guy doing it does every local racers rear end

mikestang63

90lxcoupe

A5literMan

At least it is lumpy...

90lxcoupe

A5literMan

At least it is lumpy...

rdharper02

like kicking myself in the junk

NIKwoaC

中國製造

FoxMustangLvr

I love my Pimp

90lxcoupe

Similar threads

Fox The Coolest Thing The Ups Man Has Ever Dropped Off Has Arrived

I love my Pimp

At least it is lumpy...

like kicking myself in the junk

the guy doing it does every local racers rear end

At least it is lumpy...

At least it is lumpy...

like kicking myself in the junk

中國製造

I love my Pimp

Similar threads

Privacy & Transparency

Privacy & Transparency