The thread of the nicest FOXES!

hemi_fan · Feb 6, 2007

Mach 10 said:
Here's a pic with my summer rims on, and it's been lowered a lil since these pics were taken, and a pic of the engine during rebuild, I ordered the complete trick flow track heat kit for it and add a bunch of other supporting tranny and suspension mods as well, can't wait to get it back to the States in June and finish up the rest.

such a sweet car, do they salt the roads durring winter in Germany?!

Mach 10 · Feb 7, 2007

hemi_fan said:
such a sweet car, do they salt the roads durring winter in Germany?!

Yep they salt they he!! out of them, alot of peoples rims get messed up over here. That's why I don't drive the stangs in the winter unless my Beater BMW breaks.

FrankenStang · Feb 7, 2007

cobracapri, NICE Capri!

trav_19 · Feb 8, 2007

ok i put some in here...lol i dont think my car is deserving of being in here but oh well

white_97_GT · Feb 9, 2007

looks pretty nice to me

trav_19 · Feb 9, 2007

i hate the quality of the camera used ...the color looks so red its the orange-red....like the cobras i think its called performance red.

Waz900 · Feb 13, 2007

My Foxbody

Here is the before and after. I have more pics if anyone is interested..

Waz900 · Feb 13, 2007

Another

Here are some better pictures. The second is a little blurry, but you can see the Cobra R 2000 hood a little better

89FHPCoupe · Feb 17, 2007

1989 Florida Highway Patrol Coupe, 94k miles, Trick-Flow Twisted Wedge Heads, Motorsport r/rockers, E303 Cam, Edelbrock upper and lower (ported to heads), 24lb injectors, Pro M 75mm air meter, BBK throttlebody, main girdle, 7 qt. Aluminium pan, Tremic TKO trans w/pro 5.0 shifter, Griggs Racing tubuler K-member ( tube upper/lowers) coil overs, Griggs tubular rear suspension ( fully adj w/ panhard bar, Be Cool Radiator/ twin fans, alum d.shaft, Mac long tubes, 3" H-pipe, 3" race magnums, T/A Rear cover/ girdle, Auburn Locker ( 3.55), w/ disc rear conversion, Mcloud Dual-Friction Clutch w. bluprinted motorsport pressure plate & 50oz Flywheel, Aeromotive complete fuel system w/ stainless braided lines, upgraded fuel rails, Apex lightweight seats, 4 pt roll bar, weld drag lites, 3" cowl hood. She is out for paint as of now.

Jason 302 · Feb 18, 2007

View attachment 402812

View attachment 402815

View attachment 402817

grizzlywilds · Feb 21, 2007

Yeah she's got a few dings, dents, and some wiring issues but I love her and plan on doing some work to her this summer. This is the best view of her now a day after I bought her and drove her from Cali. to her new home in Michigan.

a href="http://photobucket.com" target="_blank"><img src="http://i161.photobucket.com/albums/t215/grizzlywilds/sideview.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>

allballsmustang · Feb 22, 2007

heres my baby i cant find the rest of my pics at the moment

and me and my fathers stang

allballsmustang · Feb 23, 2007

and just to put it into perspective this is what she looked like when i bought her... trashed!!

1990Coupe · Feb 23, 2007

damn she looks purrrrrtyyyy!!!

white_97_GT · Feb 23, 2007

nice work, beautiful car

Jason 302 · Feb 23, 2007

allballsmustang: I was just wondering about those rims. Did you get the set from 50resto.com? I seen they have them as a set on their website. Those are 17x9 right? I was wondering what size tires you put on them, and if you had any rubbing issues up front. Thanks bud

allballsmustang · Feb 23, 2007

Jason 302 said:
allballsmustang: I was just wondering about those rims. Did you get the set from 50resto.com? I seen they have them as a set on their website. Those are 17x9 right? I was wondering what size tires you put on them, and if you had any rubbing issues up front. Thanks bud

yes they are 17x9 03 cobras in a 4 lug...i got em from cj pony parts in harrisburg pa...saved alot of money on shipping because i just drove there to pick em up...there not cheap though in chrome...just so you know though the only issue with using those rims is you have to use center caps slightly different than the ones they normally come with because they will hit the dust cap...you need a deeper one on a foxbody... and as for tires im running a 245 nitto 555...it does hit just slightly...they stick out a bit in the front but i love that look...i used 1/2" spacers in the back also...hope this helps

Jason 302 · Feb 23, 2007

allballsmustang said:
yes they are 17x9 03 cobras in a 4 lug...i got em from cj pony parts in harrisburg pa...saved alot of money on shipping because i just drove there to pick em up...there not cheap though in chrome...just so you know though the only issue with using those rims is you have to use center caps slightly different than the ones they normally come with because they will hit the dust cap...you need a deeper one on a foxbody... and as for tires im running a 245 nitto 555...it does hit just slightly...they stick out a bit in the front but i love that look...i used 1/2" spacers in the back also...hope this helps

Most places I've seen are selling them for around $170 a piece, but 50resto.com gives you a set of lugs so thats the best deal I've found so far. You would think being 4 lug the wheels would be built for the older foxbodies and they would take into consideration the center cap thing, but oh well. What did you have to do? Get different ones? If so where? Where exactly do the front wheels rub? Did you try flipping the quad shocks for clearence in the back for clearance? Also how do the 245's fit on a 9" rim, do they look goofy or anything? Sorry for so many questions just trying to plan ahead

allballsmustang · Feb 23, 2007

Jason 302 said:
Most places I've seen are selling them for around $170 a piece, but 50resto.com gives you a set of lugs so thats the best deal I've found so far. You would think being 4 lug the wheels would be built for the older foxbodies and they would take into consideration the center cap thing, but oh well. What did you have to do? Get different ones? If so where? Where exactly do the front wheels rub? Did you try flipping the quad shocks for clearence in the back for clearance? Also how do the 245's fit on a 9" rim, do they look goofy or anything? Sorry for so many questions just trying to plan ahead

I just had to send back the center caps and they got me deeper ones....the front wheels actually only rub on the gt sideskirt attached to the front bumper...thats the only spot so its really not that bad...as for the quads in the back i have kyb's and with 1/2" spacers they fit fine...the problem with flipping a quad shock is that if you install it upside down (on a kyb) then they have that opening where all the dirt can go down inside...on the factory quad it doesnt have that so its not a problem...but my quads were shot so i replaced them...as for the 245's i think they look sweet on a 9'' rim...some guys go narrower but i like the way they look...and for the price, i paid 200 but that was when they first came out in a 4 lug so they were a little more expensive, 170 isnt a bad price at all...i dont think youll be disappointed at all with the way these rims will look on your car at all...im going to try to get more pics off my computer at home too put up to see tire width...

bones90gt · Feb 23, 2007

Just thought I would add my son's 90GT (Well once was a 90 4cyl LX..hehehe)
Be nice ya'll he is only 16..

And one with his 90, my wife's 90GT and my 87GT T-Tops..

The thread of the nicest FOXES!

Active Member

Attachments

New Member

Now, give me a damn CT!

New Member

Attachments

Member

New Member

Member

Attachments

Member

Attachments

New Member

Attachments

Attachments

New Member

Member

Attachments

Member

Attachments

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency