Thinkin about this license plate frame...

bigcat · Jun 8, 2006

timeless2 said:
I cannot see why one would, unless the dealer PAID someone for it to remain in place or he/she really liked the dealer. Most people probably don't give a flyin' F, however.

if you wreck it right away as some people do, after it is fixed, there are no more dealer stickers!!

jasonh_86 · Jun 8, 2006

I've never had a car with dealership stickers

Fortunately, the guy who bought my current car (when it was brand new) took it home and removed the dealership sticker asap, so the paint didn't fade and then be visible when the sticker was finally removed.

timeless2 · Jun 8, 2006

bigcat said:
if you wreck it right away as some people do, after it is fixed, there are no more dealer stickers!!

Let's hope not.

LI98GTStang · Jun 8, 2006

What you have is not bad, much better than being naked and unfinished and keeps the plate in shape. I voted no because it covers the state lettering and the cost though.

For the front I went with the stangnet lice. place holder and for the rear, I chose just to do the 15.00 std. chrome mustang one that I think looks pretty good for what it does.

stangGT97 · Jun 8, 2006

Nice cars guys, personally I wouldn't get it just because I don't think it would look good if you had Mach1 displayed twice in a 2 foot radius in the back. Maybe just remove the existing dealer one, clean up your plate, and be done with it?

Crzyhrse · Jun 8, 2006

I have a good amount of the MGW stuff, but I have to draw the line with a $48 black frame or $58 chrome frame. And then $15 extra if you want the locking screws. Sorry MGW.

PULMEOVR · Jun 8, 2006

The Steeda one is nice. It's also $8. It is what I have, and I love it.

http://www.steeda.ca/catalogue_product_type_559.asp

Pennywise2 · Jun 8, 2006

I voted no also.You should get a Stangnet License Plate Frame
and show everyone your Stangnet pride.

DTNODYA · Jun 9, 2006

I guess you guys are lucky or I am targeted by the popo ... I have a lisense plate frame that says SALEEN on the bottom which Steve Saleen gave me at a Mustang car show a few years ago (awesome car show like 6,000 mustangs there). Anyway, I got pulled over twice for "illegal display of plates". A big WTF because at the time I worked at a dealership and we used to put them on new cars (as you all have been discussing) and I got two written warnings. I think it was just an excuse to pull me over but I got tired of being pulled so I took it off and it's in my room.

The cops said that it's "illegal" because it covers half of the month and year on the stickers. Go catch bad guys idiots.

san~man · Jun 9, 2006

Is it me, or is you car sitting crooked? I hope it's the ground or the camera angle, but the curb below the rear bumper looks level

san~man · Jun 9, 2006

50 bones seems a bit steep, especially since I would have to buy 2 frames

CatmanJJ · Jun 9, 2006

LI98GTStang said:
I chose just to do the 15.00 std. chrome mustang one that I think looks pretty good for what it does.

I have that same frame, it's a bit pitted from the salty winter roads and what not, forgot to take it off one winter. Anyway to get that one shining again

san~man said:
Is it me, or is you car sitting crooked? I hope it's the ground or the camera angle, but the curb below the rear bumper looks level

Ha, yea it's definitly the ground, the space isn't exactly level, sorta slopes down towards the front driver's side whee. If I had a head on pic of the car you'd see what I meant.

RaceDvr50 · Jun 9, 2006

If you like it it looks like high quality stuff. You probably won't get something like that for less than $30 since it is billet aluminum and powdercoated. Most frames are either a cheap low grade casting or stamped steel with a little chrome or paint. I should know a little about this stuff because I've been a metal fabricator for 15 years and I program and run lasers.

blacknblue2002 · Jun 9, 2006

I left my dealer plate frame on the car cuz I didn't think it looked that bad...
http://i60.photobucket.com/albums/h13/BlacknBlue2002/plateframe.jpg
...I mean technically my car is a 'beach ford'...and the red/white/blue theme kinda flows with the horse and the rest of my car

I used to have the same frame on the back till I got my Mongoose kit...decided I'd throw the cheap vortech one on instead...
http://i60.photobucket.com/albums/h13/BlacknBlue2002/vortechframe.jpg
(don't mention the huge scratch down the center of the bumper...i pretend that it does not exist)

Uncle Meat · Jun 9, 2006

I have the chrome Cobra license plate frame from MGW. It's triple plated and of the highest quality! It's so beefy that my struts are unable to lift the trunk open without some assistance!

It's well worth the cash as is everything MGW sells...

U.M.

Not the best picture of it...

tomustang · Jun 9, 2006

CatmanJJ said:
...from MGWLTD, I know they make high quality stuff, but $50 is a lot for a friggen frame. What do u guys think. Gettin tired of supporting the dealer's cause on my car.

View attachment 464099

That's one hot mutha ****ing ride bro bow it down RESPECT!!

CatmanJJ · Jun 9, 2006

Uncle Meat said:
I have the chrome Cobra license plate frame from MGW. It's triple plated and of the highest quality! It's so beefy that my struts are unable to lift the trunk open without some assistance!

It's well worth the cash as is everything MGW sells...

U.M.

Not the best picture of it...

Dude I don't wanna sound gay or anything, but your car has a nice ass...I was just about to give up on it, now I want it again cause of that pic lol.

tomustang said:
That's one hot mutha ****ing ride bro bow it down RESPECT!!

4 LYF3!!

View attachment 464093

GDawg · Jun 9, 2006

$50 is a bit steep but if you have the money, get what you like and be happy. Back a few years ago, my ex-brother in law had a plate that said, "NO FEAR" so I put one on that said, "FEAR THIS". Since then we both divorced our wifes, hot they may have been but guys gotta do what guys gotta do...

My current plate frames are basic chrome.

DropTopPony · Jun 9, 2006

san~man said:
50 bones seems a bit steep, especially since I would have to buy 2 frames

thats what made me not order them....$100 for liscence plate frames was too much for me eventhough i was ordering everything else they sold

tomustang · Jun 9, 2006

DropTopPony said:
thats what made me not order them....$100 for liscence plate frames was too much for me eventhough i was ordering everything else they sold

dual licence plates suckers

Thinkin about this license plate frame...

Should I buy this frame?

Yes - it's looks sweet

No - save the money for beer and video games

start with the upper hole, and if more traction is

I

Vi Veri Veni Versum Vicus Vici

New Member

Active Member

I need a bigger E-Penis.

Banned

Member

O-G

O-G

Captain Tangnet

New Member

Member

Banned

Attachments

Psychotic Member

Captain Tangnet

Noob Slayer

Psychotic Member

Similar threads

Privacy & Transparency

Privacy & Transparency