• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Thinking about an electric water pump......any experiance here?

  • Thread starter Thread starter streetgrande69
  • Start date Start date May 19, 2006
S

streetgrande69

Founding Member
Nov 2, 2002
976
0
16
Splendora, Tx
May 19, 2006
#1
  • May 19, 2006
  • #1
Thinking about running this water pump on my 351w. It draws 10 amps....would i need to also up-grade my alternator? I've heard that running a electric waterpump helds with traffic driving in hot weather because it's a steady flow regardless of engine speed. Anyone out there running the below pump? I like this design because of the fact that it has all the factory connections for the heater and can have the lower hose on either side. Plus it just looks bad-ass!

http://www.meziere.com/index.php?pgName=wp311
Here are a few pictures...

 

rbohm

Founding Member
Apr 12, 2002
6,698
550
204
tucson,az
May 19, 2006
#2
  • May 19, 2006
  • #2
i am also considering use the meziere electric pump. the motor wont need service for 2400hr, i do recomend that you get a hobbs hour meter and install it so you can track the hours the pump runs. as far as upgrading your alternator, you dont need to as the pump only draws 12 amps, but it woldnt be a bad idea either, especially if you are also going to run an electric fan as well. a 3G alt from a 94-95 mustang will do nicely. dont forget to use the relay kit they sell as well. one more thing, while you can install a system to allow the pump to run with the engine off, i dont recomend it as it will draw your battery down, and if it is marginal the you are going looking for someone to give you a jump start.
 
B

bnickel

Founding Member
Aug 21, 2002
5,640
3
77
lubbock, texas
May 19, 2006
#3
  • May 19, 2006
  • #3
personally i wouldn't do it, they really aren't intended for driver type vehicles. some people have had ok success with them but i would just use a good high flow aluminum pump like a milodon or flow kooler. the flow kooler would probably be the best bet and they are relatively inexpensive about on par with a NEW stock replacement pump, 65 bucks or so.

i would upgrade your alternator regardless of getting the electric water pump or not. main reason is that nice new mass-flo efi system you'll be running and the accompanying ignition system. BTW are you going to run an MSD type ignition box as well? i would, the 3g alternator is one choice or you can use one of the older GM internally regulated style alternators as well, you can get one of those in the 85 amp range or higher and it looks close enough to stock that most people wouldn't notice, not that it really matters.
 
F

fastback brian

Founding Member
Jul 15, 2002
540
0
0
So Cal , I.E.
May 19, 2006
#4
  • May 19, 2006
  • #4
that pump is for a serp belt application. Ive installed a few of them on blown 5.0's that needed extra cooling. I would reccomend anyone an electric pump for any type of driving. I had a electric setup for over ten year and never looked back. My new pump is the moroso billet pump but it doesnt have heater hose connection. My car has never ran as cool as it does now. traffic is no problem and keeps cool in the hottest local car cruises......I also have a three row fox radiator, junk yard fan and alt off a 3.8 taurus.
 
S

steel1212

Active Member
Jun 24, 2004
1,180
0
36
Frankfort, Ky
May 19, 2006
#5
  • May 19, 2006
  • #5
what is the price on that bad boy.
 

jerry S

New Member
Sep 3, 2003
1,365
1
0
52.22N 5.12E
May 19, 2006
#6
  • May 19, 2006
  • #6
I have a Mez WP 111B on my car that flows 35 gpm. I have a MEZ-WP150B (Summit price $180) replacement electric motor to keep in the trunk in the event the motor dies out on me miles from home. My car sees such limited street time that I think it will take a few years before I ever get to 2400 hours. I upgraded to a PA-Performance 150 amp alt because of all the electrical accessories I am running:

Electric water pump
electric fuel pump
electric vacuum pump for the power brake booster
electric fan
and a booming stereo planned.

I realized I needed the bigger alt when I noticed my lights dimming when the car idled.

However, unless you have a 600+ hp engine, I believe that a 55 gpm pump is overkill. If you send the WP111 to Meziere, they will tap it for you for $30 and add a fitting on the side of the pump of your choosing so you can run a line from the water pump to the heater core.
 
You must log in or register to reply here.

Similar threads

K
Electrical charging issue
  • knucklehead11
  • Jul 15, 2024
  • SN95 V6 Mustang Tech
Replies
5
Views
894
SN95 V6 Mustang Tech Jul 16, 2024
Mcmahst
B
Electric Water Pump yes or no
  • Brent Francis
  • Jul 24, 2022
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 3, 2022
90sickfox
Fuel Fuel Pump Rewire, New Fuel Lines, and Installation of New Fuel Pump Hanger with AN6 Connections
  • AeroCoupe
  • Mar 12, 2023
  • Fox 5.0 Mustang Tech
  • 2
Replies
33
Views
13K
Fox 5.0 Mustang Tech Apr 16, 2023
AeroCoupe
Resolved Close to solving rough cold & hot idle, I think, but not sure how to move ahead
  • vferrizz
  • Sep 18, 2022
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
50
Views
8K
Fox 5.0 Mustang Tech Aug 26, 2023
vferrizz
spark plug boot
  • Bree
  • Sep 1, 2021
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 7, 2021
Bree
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?