Thinking of buying late 60's 351W block, need combo suggestions.

Cleveland heads? That seems like alot of extra work for something that can be acheved with regular aluminum Windsor heads.

Cleveland Heads !

Unless you can get those Ausie heads for dirt cheap I'd pass on that idea and leave the cleveland stuff for restorers and Panteras ! It's not that they're bad heads, cause they're pretty good. It's just that they're heavy as hell and really expensive for the power you get in return. I'd go with a set of AFR aluminum Windsor heads; the 185's for a motor as big as you're going, and hang on to your ass cause it'll have some real BIG torque ! They flow as good or better, they're half the weight and they're less likely to cause clearance problems because of their smaller dimensions and you'll be able to buy headers that will fit them to your chasis easier.

This is my suggestion and my future plan.

My plan would be a 392 storker with proted Gt-40X heads and a 750 Speed Demon carb. Im still learning about cams but the Comp Cams XE282HR seems like a good one but not 100% sure about cam "talk" yet. The reason I'd go with a 392 is there cheaper to build and machine. I think a set-up like this would be very streetable and have lots of low-end TQ.