Those of you with Eibach Sportlines or 2" drop come in.......

[IJUSTWON]

I have Eibach Sportlines on my Bullitt but can't find a jack lift or anyway to get it off the ground. The Jacks and Lifts arent low enough to get under the car. What do ya'll use to get the car off the ground?

 

[hotrodnut]

My car is not lowered 2" but my Son's is. Even though mine isn't I still have problems jacking up the front.
Even to drive up on our ramps we place 2 x 10 pieces of wood in front to help get on them without bending back the chin spoiler.
For the rear jacking we use 2 floor jacks, one on each lower control arm with a 2 x 4 in between the jack and arms.
Up front we have a low profile jack that we use from the side and get under the sub-frame until it is up high enough to put the regular floor jack under the k-member.
It seems a bit of a hassle to have to do but the lowered performance gains are worth it to us.

 

[mity2]

My car is lowered with Sportline and isorater removed. Jack is least of my concern. I have to watch out for everything on the road. Like rock, dead animal, and pot holes. As far as lifting goes, I drive up on several sheets of plywoods first(gain about inch and half this way) then I use my Alminum racing lift and jack it up.
It gets old after a while. but thats about all I can do to lift her...

 

[whyask]

if you have two fairly big friends that can lift.....have them lift FROM the wheel wells and slide the jack right under with a quickness... I know its getto, but when your broke and time in not availble hey IT WORKS...

 

[GDawg]

I drive up on a 2x4 and then lift the car.

 

[MineralG2k2GT]

if you have two fairly big friends that can lift.....have them lift FROM the wheel wells and slide the jack right under with a quickness... I know its getto, but when your broke and time in not availble hey IT WORKS...

Yes it does and I do the same exact thing, just have a buddy lift it up from the wheel wells and slide the jack right under. I have to do this every time i want to get under the car...after 2 yrs of owning it I am used to it

 

[whyask]

AAHHH ha..im not the only one...So there are others out there..I see..

 

[MustangLife]

I have a standard dime a dozen MVP jack that works perfectly fine with my eibach sportlines on my 03 gt, I have subframe connectors too. The springs are settled and been on the car for a year and a half now and clearance from all 4 corners to jack it up. I also never scrape my car or anything. Walmart, K-mart, advance, autozone sells those jacks for like $30.

Josh