Those with MM Caster Camber plates come in here

[WhiteDevil]

So i got steeda springs and its dropped about an inch. How should i distribute the spacers, for the strut? I guess i missed that step and i put them all at the bottom, but i was re reading the instructions, so im gonna go out and fix that tommorow after school. Thanks for the help homies.

 

[Rootus]

As I remember, you want the strut to be as far up as possible without interfering with the hood.

 

[WhiteDevil]

Ok thanks, anyone else?

 

[zenboy99]

subscribing, I'm putting these on this weekend...hopefully.

 

[juiced_94gt]

The right way was to measure the strut top BEFORE you lowered it and added the spacers to your lower ride height, but just make the strut pop at least 1" higher than before, or as much as you can without hitting the hood.

 

[WhiteDevil]

Ok, cause basically they give you 4 spacers for each side, two big and two smaller. So i think ill work with those to bring it up. Since i have already installed them i dont have a reference to make them an inch higher than. Ill just try to get them as high as possible.