• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Throw out bearing seems about to go....

  • Thread starter Thread starter dz187
  • Start date Start date Nov 16, 2006

dz187

Member
Sep 22, 2005
65
0
6
Arizona
Nov 16, 2006
#1
  • Nov 16, 2006
  • #1
It's been making a moan whenever I depress the clutch, but just recently that noise has gotten alot louder. Is there a bandaid that can prolong the life of the TOB long enough for me to order some parts online? What clutch/flywheel should I get? I was looking at these:

http://store.summitracing.com/partd...908331+4294908282+4294924929+115&autoview=sku
http://store.summitracing.com/partd...908331+4294908282+4294924929+115&autoview=sku

but I don't know how stiff of a clutch pedal the Zoom has... I want to keep stiffness around stock levels. What other parts will I need/should I get? How much would all this cost to get installed? I live in an apartment and I'm not the most mechanically inclined person on the earth.
 
J

joeficsit

New Member
Dec 15, 2003
16
0
1
Brownsville, TX
Nov 16, 2006
#2
  • Nov 16, 2006
  • #2
If you can afford the good stuff, by all means go for it. I'm in the middle of doing the clutch thing myself. I got a nodular iron flywheel from D&D for $99.

I would recommend replacing (as long as you're in there) the throw out bearing, the pilot bearing, the rear main seal (if it's leaking) and the fork for a HD version of it along with it's pivot. Good luck!
 
H

huudoo

New Member
Jul 25, 2006
18
0
1
Knoxville TN
Dec 19, 2006
#3
  • Dec 19, 2006
  • #3
WOW my 2004 GT makes a squalling / screeching squeeking sound when i drive 20 to 30 min and get the car hot, i does it when i push the clutch in , but i can back off the clutch a little ,and the noise stops, not sure what it is just yet
could be a Pilot Bearing or Tob
 

Quikstang

Founding Member
Mar 9, 2000
846
0
0
Orlando FL
Dec 19, 2006
#4
  • Dec 19, 2006
  • #4
For the mods you have to your car the A302 Clutch kit from Ford motorsports 180 bucks and you get the clutch, pressure plate, and throwout bearing.. i ran a few in my car back in they day. would work fine... Stock pedal feel and a tried and true factory style replacement. Unfortunatly, if you have to pay for labor, it is most likely going to cost you more than the clutch. go ahead and replace it as soon as it starts squeling.. And use a QUALITY throwout bearing.. i went cheap a few months back and put in just a regular discount Auto parts throwout bearing when i put the transmission back in the car, not even 3 months ago.. Well it started squeking, and I just let it go for a while, then the bearings froze up so when i pushed the clutch in the pressure plate was actually just spinning on the Frozen up T/O bearing... I took it back out when the noise got really strange and it ended up DESTROYING the pressure plate assembly costing me another 300 bucks for a replacement assembley.. all that over a 30 dollar fix and about 2 hours of my time... lol...

Huudoo... a little bit of noise is not neccesarily the end all be all. I have heard cars with brand new bearings that make a little tinkly sound when released... The squaling of the bearings going out is unmistakable... you will def. know when its not right..
 
S

slvr00gt

Founding Member
Apr 3, 2000
164
0
16
Denver area
Jul 11, 2007
#5
  • Jul 11, 2007
  • #5
huudoo said:
WOW my 2004 GT makes a squalling / screeching squeeking sound when i drive 20 to 30 min and get the car hot, i does it when i push the clutch in , but i can back off the clutch a little ,and the noise stops, not sure what it is just yet
could be a Pilot Bearing or Tob
Click to expand...

I have precisely the same problem. Car is fine first 20 minutes driving in the hot weather, but as soon as it warms up it makes all kind of noises when clutch pressed. Did you get it fixed? What was the issue?
 

Nibbie

New Member
Mar 10, 2007
127
0
0
Jul 12, 2007
#6
  • Jul 12, 2007
  • #6
I use a centerforce II clutch and a fidanza aluminum flywheel. its a great set up and I havent had a problem since. I also got a centerforce throwout bearing, I wanted to make sure it would last. *it gets me mad that summit would lower there price on the flywheel a year after i got mine- dam them lol, it was like $360.00 a year ago*
 
You must log in or register to reply here.

Similar threads

M
Need a new starter.. What's good.
  • MYSC351
  • Apr 20, 2009
  • Fox 5.0 Mustang Tech
Replies
2
Views
3K
Fox 5.0 Mustang Tech Apr 21, 2009
jrichker
will these brakes work
  • jhonda
  • Dec 28, 2008
  • Fox 5.0 Mustang Tech
Replies
0
Views
612
Fox 5.0 Mustang Tech Dec 28, 2008
jhonda
P
Which clutch cable?
  • ponyracer1
  • Apr 30, 2009
  • Fox 5.0 Mustang Tech
Replies
4
Views
985
Fox 5.0 Mustang Tech Apr 30, 2009
Darkwriter77
AOD rebuild options
  • jlangholzj
  • Apr 29, 2009
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Apr 29, 2009
lang williams
L
Should I get Rubber or Poly Control Arm Bushings?
  • Black1987Stang
  • Jan 6, 2009
  • Fox 5.0 Mustang Tech
Replies
9
Views
6K
Fox 5.0 Mustang Tech Jan 10, 2009
LiquidGT
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?