what tools are needed for a timing adjuster for my car? i know when i put pullies on that was a pain cause i had to take the fan out and disconnect and move the radiator tank. thanks
18mm socket (for original crank bolt)
19mm socket (new crank bolt)
10mm socket (ac compressor bolts)
10mm wrench (sensor bolt)
8mm wrench (sensor bolt)
allen wrench for bolts to adjust timing(I think they are 5mm)
utility knife for removing extra silicone under crank bolt
3/8" drive wrench(longer is better for crank bolt)
You'll also use a the 3/8 drive wrench for the belt tensioner.