What size timing belt is required for a 1994 Mustang 3.8L with A/C and Mac underdrive pulley's? I had one on before and it just blew to smitherines a few minutes ago. I guess it wasn't the right size.
Looks like a 96" belt for use with the 25% Reduction Crank and Alternator Pulley. I think - I'm still looking into this...
'01-'03, V6 Underdrive Pulley and Balancer, 25% Dampener Crank
Gates part number K060966
99-00, Some '01, V6 Underdrive Pulley and Balancer, 25% Dampener Crank
Gates part number K060966
1994-1998 V-6 Underdrive Pulleys; 25% Crank + 2 3/4" Alternator
Gates part number K060960
1994-1998 V-6 Underdrive Pulleys; 25% Crank
Gates part number K060960
Functional Part Number Gives You The Size Of The Belt
4 06 049 5
1st digit (4) represents a K section Poly V-belt.
2nd and 3rd digit gives the number of ribs.
4th, 5th, and 6th digit are the length in inches.
7th digit is tenth of an inch.
Part number 4060495 would be a K section Poly-V belt, six ribs wide, with a length of 49 and 5/10 inches.