• Mustang Forums
  • Mustang Sound & Shine All

tiny scratches

  • Thread starter Thread starter cronin49
  • Start date Start date Dec 13, 2003
C

cronin49

Banned
Aug 12, 2003
432
1
16
SC
Dec 13, 2003
#1
  • Dec 13, 2003
  • #1
Hey everybody, I just put my '03 vert to bed for the winter, and am noticing tiny hairline scratches on the surface, because I washed it at least twice a week and waxed it once per week. I used a terrycloth mitt and a bucket of soapy water to wash it, and 4 or 5 terrycloth towels to dry it. I washed the towels between each car wash. What am I doing wrong? I am thinking about using one of those California Squeegees to pre dry my car and finish drying it with a chamois. Let me mention that I always threw out the wax or polish foam pad applicator after just one use. What is my problem? I hate to see scratches appearing on a car with only 5000 miles on the odometer. I have used Maquires #'s 9 to try to get the tiny scratches out by hand, it helped a little but they are still there. I know have #'s 7-9-20-26 in my arsenal, do I need to have it buffed out professionally? My car is the beautiful Laser Red.
 
R

rjstaaf

Founding Member
May 31, 2002
1,310
2
39
Somewhere
Dec 13, 2003
#2
  • Dec 13, 2003
  • #2
The most common cause for surface damage is actually washing your car. The problem is as much in how you wash as what you use to wash it.

Wash mitts. You want as deep a nap as possible to trap any dirt and pull it away from the paint. I don't like sponges because the dirt gets trapped inside the poors and is hard to get out. Terry washmitts are pretty good but, sheepskin wool washmitts have the deepest nap you can get. You can buy them at WalMart, just make sure you look inside. It should look like raw leather inside.

There are lots of car wash detergents out there. As far as cleaning power they are all pretty much the same. What you want to look for if you are concerned about scratching is how much librication they have, this is where there are wide differences. The best stuff I have found that is widely available is Meguiars Gold Class car wash. It isn't that great on suds but, it provides plenty of lubrication to help prevent scratching.

The process. Here is how I wash my car.

1. Take your hose and completely rinse the car down from top to bottom including the wheels and wheel wells. Your goal is to remove as much dirt and debris as possible. Anything you can remove now will lessen your chances of scratching the paint while washing.

2. Use 2 buckets, one filled with plain water and the other filled with your car wash detergent/water mix.

3. Start washing
a. rinse the wash mitt well in the plain water to remove any debris that may be caught in the nap.
b. dunk the wash mitt in the detergent/water bucket to load it with soap.
c. start washing, usually I do one panel at a time.
d. rinse the panel with the hose to remove the soap.
e. go back to step (a) and and repeat until the car is done.

After you wash the next most common cause of scratching is drying your car. To minimize your drying efforts take the nozzle off your hose and let the water flow over the car starting at the top. This causes a sheeting action which will carry most of the water off the car.

As to drying I would use microfiber towels they are much softer than regular cotton terry towels. Waffle Weave microfiber is the best thing for drying. The best source I have found for microfiber is www.pakshak.com.

To remove those scratches #9 should work. If not I would consider purchasing a dual action polisher. You can find more information on them at http://www.properautocare.com/porcabpolac.html. It may sound expensive but, consider the cost of having your paint professionaly buffed. Also consider that there are far too many cars out there with severe buffer marks that were buffed out by so called "professionals". It is hard to find someone who really knows what they are doing. With the dual action polisher you can also use more agressive compounds that should easily remove those scratches. I don't do surface prep by hand at all anymore.



Hope this helps.
 

decoy562

New Member
Oct 9, 2003
1,526
0
0
Acworth, GA
Dec 15, 2003
#3
  • Dec 15, 2003
  • #3
You could try Scratch X, it's worked for me on past cars.
 
You must log in or register to reply here.

Similar threads

T
What's it Worth? 2002 GT conv/auto
  • tonydetesta
  • Jan 7, 2026
  • What is it Worth?!?!?
Replies
3
Views
665
What is it Worth?!?!? Jan 21, 2026
Mustang5L5
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
25
Views
544
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 6, 2026
85GT4V
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
194
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
410
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
B
Take a look at my rack!
  • bicknell
  • Sep 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
705
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 13, 2025
Willybill32
Share:
Bluesky Email Share Link
  • Mustang Forums
  • Mustang Sound & Shine All
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?