M MattTheBat83 New Member Mar 31, 2006 203 0 0 Mar 31, 2007 #1 Mar 31, 2007 #1 what modification has to be made to the cross member to make the tko fit on a foxbody?
G getusummm Member Dec 26, 2004 156 0 16 Mar 31, 2007 #2 Mar 31, 2007 #2 You need to grind the spot welds off of the tubes on each end. The tubes need to slide about a 1/2" or so. Once you cut the spotswelds so the tubes can slide, you will see where it needs to be. Then just retack the tubes when done.
You need to grind the spot welds off of the tubes on each end. The tubes need to slide about a 1/2" or so. Once you cut the spotswelds so the tubes can slide, you will see where it needs to be. Then just retack the tubes when done.
