Toploader Rebuild - Missing a Part - Help!

fasttback · Aug 30, 2006

While rebuilding my Toploader this past weekend it looks like the previous owner lost a round detent and replaced it with a ball bearing. Checking some web sites, this looks like a tough item to find. Does anyone have Toploader spare parts laying around...maybe a rounded detent???? Please help if you can. Thanks.

rbohm · Aug 30, 2006

david kee should have the detent you need. consider however replacing the detents with the sharp pointed ones from an earlier top loader. you will have to change the shift rails as well, but the upgrade is worth it to prevent the trans from popping out of gear as it ages. you might also see if a place called stick only is still in business(in paramount, ca iirc) as they should have the parts as well.

dennis112 · Aug 30, 2006

fasttback said:
While rebuilding my Toploader this past weekend it looks like the previous owner lost a round detent and replaced it with a ball bearing. Checking some web sites, this looks like a tough item to find. Does anyone have Toploader spare parts laying around...maybe a rounded detent???? Please help if you can. Thanks.

You will need to know if the detent is pointy (comes to a point, like a pencil tip) or blunt (a blade, like a screwdriver tip) when ordering parts. Easy enough to figure out since the one you need will have the same shape as the other 4 detents found in your tranny.

Call Mark at Toploader heaven and he will help you out:

Telephone number: 1-580-229-1779

Email address: toploaderheaven@hughes.net

Hours: 7 a.m. until 8 p.m. (Central Standard Time)

fasttback · Aug 30, 2006

David Kee only had detents with a kit that cost $144.49. Maybe he has some side stuff?

I did buy my rebuild kit from Mark at Toploader Heaven and will try to contact him.

My transmission is using 3 rounded detents, 2 hatchet head detents, and 1 interlocking pin. I'm missing one of the round ones (according to the literature).

dennis112 · Aug 30, 2006

fasttback said:
My transmission is using 3 rounded detents, 2 hatchet head detents, and 1 interlocking pin. I'm missing one of the round ones (according to the literature).

You have the good early style then. Mark sells used parts too and he should have what you need. Since you bought your kit from him, I'll bet the price will be little or nothing.

fasttback · Aug 31, 2006

Mark at Toploaderheaven came through! I should be receiving the parts early next week. Mark has been very helpful throughout the process and I would highly recommend him for his customer service alone.

Toploader Rebuild - Missing a Part - Help!

fasttback

New Member

rbohm

dennis112

fasttback

New Member

dennis112

fasttback

New Member

Similar threads

Toploader Rebuild - Missing a Part - Help!

fasttback

New Member

rbohm

dennis112

fasttback

New Member

dennis112

fasttback

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency