Torker II

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Is anyone running a Torker II intake on a 351w carb'd? I found out that the vic jr requires a different msd dizzy then i have and i was wondering if anyone has run this intake or if it is even worth buying? I would like a single plane to go with my vic jr heads. i currently run a wiend stealth dual plane.
 
Yea I know a few that run a torque 2,nice thing with it is the fact its not as tall like the victor jr.

The three things I dont really like is that the plenum volume as cast is small (but a 1-2" open spacer will take care of that),the entery into the ports is practicly 90* (bad for having fuel drop out of the stream) and the log style runner make cylinder "cross talk" and fill less even.

But for nitrous its still a step-up
 
i was thinking bout running that intake with a 1 inch spacer. that intake and my current dual plane are for the same rpm range and basically that torkerII looks like a wiend stealth with the divider plate of the dual plane removed. It didn't look like a awesome intake design if you ask me.
 
86bluecobra said:
i was thinking bout running that intake with a 1 inch spacer. that intake and my current dual plane are for the same rpm range and basically that torkerII looks like a wiend stealth with the divider plate of the dual plane removed. It didn't look like a awesome intake design if you ask me.

Yea,the flat runners dont exactly provide an optimal entery angle....:rolleyes:
 
86bluecobra said:
what kinda cam would you go with for this intake and vic jr heads? for that matter what cam for the vic jr heads and a super victor intake?

flat tappet or roller?

you can also go solid flat tappet for reasonable price if you want to turn some more rpms (6800ish rpms),and still keep a low buck deal (we were turning 6800rpm with the hyd. roller so its good to about 7-7500rpms :nice: )
 
86bluecobra said:
am i going to have to go to a cam with more lift? in order to take advantage of the heads and a single plane?

Lift is good,more is better.

Duration will mostly affect your real power span though,and lobe speration angle will effect your n/a vs. nitrous power and can also effect your power span.Also choosing the right intake valve closing is important to keep a good dynamic compression at low speeds,but not to early as to mess you up at top end.And go with the fastest lobe (ramp rate) that doesnt destroy your valve seats and valves.

Its all in balancing and what you want.
 
86bluecobra said:
so basically i should just give my combo to comp cams or lunati and let them pick me a cam.

Yes,lol.

They will be able to help you out as they know from experiance what cam works well with certain combos.

www.cammotion.com does our cams and they arent bad on pricing,never priced a flat tappet though,you might want to go custom if you dont find something you like.
 
i was told to talk to lunati because they recruited a custom cam guy that is basically the best. he was being persued by all the cam manufactures. my buddies uncle has a custom cam shop and i have heard good things about him.
 
86bluecobra said:
i was told to talk to lunati because they recruited a custom cam guy that is basically the best. he was being persued by all the cam manufactures. my buddies uncle has a custom cam shop and i have heard good things about him.

Thats cool,if hes decent then supporting good local buisnesses is nice.

Just remeber if you get just a cam,you WILL ABSOLUTLY need new lifters.

And a good break in lube (I actualy use the ARP moly lube)