• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

TPS setting

  • Thread starter Thread starter Euphoric306
  • Start date Start date Aug 25, 2005

Euphoric306

New Member
Apr 5, 2004
905
0
0
Aug 25, 2005
#1
  • Aug 25, 2005
  • #1
so i wanna make sure my TPS is adjusted correctly and i know it should be closest to 1 volt

...but there's three wires coming out of the damn thing and last i checked u only can have two wires hooked up to a DMM lol

so my ? is.... whch two wires do i test to adjust the TPS

and in which way do i move it to adjust it... rotate it? that makes the most sense to me since it seems to be connected to the axis of the butterfly valve in the throttle body... but i could be wrong

in the haynes manual it just says to leave this up to a professional... now i know why haha
 

giddyup306

Founding Member
Oct 22, 2002
3,041
2
59
Aug 25, 2005
#2
  • Aug 25, 2005
  • #2
The signal.

There is a ground, VREF (5v) and sig. It app 1.0V @ idle and 5.0V WOT. Might want to shoot for .95 or so. Anything over that will run rich. Unless you have a 89 or newer which resest the baseline every time you go to closed throttle. If that is the case, if your between .9-1.1V your fine.


Been a while since I've delt with OBD 1 stuff so the numbers may not be down to the nats ass. They're close though.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 25, 2005
#3
  • Aug 25, 2005
  • #3
Mike has you covered pretty well.

Here is some info that might help.

If you only see 4.5 volts at WOT, that is pretty normal.

Good luck.
 

Euphoric306

New Member
Apr 5, 2004
905
0
0
Aug 25, 2005
#4
  • Aug 25, 2005
  • #4
hmm some friend told me fox computers were OBD0.. which didnt sound right to me... thanks for the clarification
 

giddyup306

Founding Member
Oct 22, 2002
3,041
2
59
Aug 25, 2005
#5
  • Aug 25, 2005
  • #5
HISSIN50 said:
Mike has you covered pretty well.

Here is some info that might help.

If you only see 4.5 volts at WOT, that is pretty normal.

Good luck.
Click to expand...


Thanks man. Look for a PM.
 

giddyup306

Founding Member
Oct 22, 2002
3,041
2
59
Aug 25, 2005
#6
  • Aug 25, 2005
  • #6
Euphoric306 said:
hmm some friend told me fox computers were OBD0.. which didnt sound right to me... thanks for the clarification
Click to expand...


They are OBD1.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 25, 2005
#7
  • Aug 25, 2005
  • #7
Euphoric306 said:
hmm some friend told me fox computers were OBD0..
Click to expand...
That sounds like a character from a Sci-fi movie.
 
You must log in or register to reply here.

Similar threads

T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
210
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
899
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
475
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
SURGING IDLE / NO IDLE CHECKLIST FOR 1999–2004 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
P
Electrical MSD box wiring for an 88 GT- few questions.
  • pindude80
  • Jul 20, 2024
  • Fox 5.0 Mustang Tech
Replies
3
Views
1K
Fox 5.0 Mustang Tech Jul 25, 2024
pindude80
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?