Traction Whipple stage 2

Jimmy koutoulas · Aug 2, 2025

Ok so how to get you these cars to hook up Whipple stage 2 cradle lock out sway bars 19x11 on 305/35/19 nittos R2. Even running them on 15psi good burnout. I still can’t hook up. I can’t even do a 60-130 pull without spinning. In hot temps. Help or advice with some experience would be appreciated.

Noobz347 · Aug 2, 2025

Here's the short answer:

You're going to have to learn to drive the car.

You have roughly 800 HP to the wheels of a car that only weighs 3800 lbs. LoL

The alternative would be to make changes to the suspension until you get a wheelie out of it but... I'm not certain that you would appreciate the side effects on the street.

Jimmy koutoulas · Aug 3, 2025

Learning to drive the car is a given. But when your making pulls and your spinning at any speeds under 65-70 mph with a drag radial lowered psi it’s not right. I was leaning towards some recommendations on more suspension parts to add to the springs cradle lock out and sway bars. Next summer I will run a bias ply. Before I play around more with the suspension.

Noobz347 · Aug 3, 2025

Yeah, spend some time with it and see if there are any "Track Days" you can sign up for in your area.

gkomo · Aug 4, 2025

A problem i don't foresee myself ever having hahah

Noobz347 · Aug 4, 2025

gkomo said:
A problem i don't foresee myself ever having hahah

You haven't even cracked the throttle on your SC yet...

In your 3200 lb. car.

Bullitt347 · Aug 4, 2025

Jimmy koutoulas said:
Learning to drive the car is a given. But when your making pulls and your spinning at any speeds under 65-70 mph with a drag radial lowered psi it’s not right. I was leaning towards some recommendations on more suspension parts to add to the springs cradle lock out and sway bars. Next summer I will run a bias ply. Before I play around more with the suspension.

Turn the traction control back on.

Jimmy koutoulas · Aug 4, 2025

Bullitt347 said:
Turn the traction control back on.

What do you mean when I have traction control on and play around with the gas the car hesitates when it spins

Noobz347 · Aug 12, 2025

https://www.fordperformanceracingschool.com/

Traction Whipple stage 2

Jimmy koutoulas

Member

Attachments

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Jimmy koutoulas

Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

gkomo

now i can hopefully expect to receive the shaft

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Bullitt347

I have been doing it wrong this whole time

Jimmy koutoulas

Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Similar threads

Traction Whipple stage 2

Member

Attachments

Stangnet Facilities Maint Tech... Er... Janitor

Member

Stangnet Facilities Maint Tech... Er... Janitor

now i can hopefully expect to receive the shaft

Stangnet Facilities Maint Tech... Er... Janitor

I have been doing it wrong this whole time

Member

Stangnet Facilities Maint Tech... Er... Janitor

Similar threads

Privacy & Transparency

Privacy & Transparency