• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Tranny is toast

  • Thread starter Thread starter mustangman70
  • Start date Start date Mar 16, 2006
Prev
  • 1
  • 2
First Prev 2 of 2

wild70stang

New Member
Nov 11, 2005
317
0
0
Mar 16, 2006
#21
  • Mar 16, 2006
  • #21
guess im gonna have to hijack this topic 2.
Ok, I think I am having the same problem with mustangman70, only my tranny gears arnt grinding. If I havent driven the stang in 6 days or more I will warm up the engine for about 4 min, then it will switch into reverse or drive and go about 20 feet before the clutch lets go and my engine is still running, but hardly moving. ususally after reving the engine a couple times, switching to neutral then back to drive, or shutting off the car will put the tranny back in drive(after starting her again). Not sure if its because the clutch is cold or even old(engine was replaced 2 years ago, not sure if the PO changed the clutch out).
 
J

John Z

Founding Member
Sep 21, 2000
581
0
0
Morgantown WV
Mar 16, 2006
#22
  • Mar 16, 2006
  • #22
Also keep in mind, this has been my daily driver since i was 16 and im 20 now......I cant complain...its the best first car i could have EVER asked for....but it needs so much work, hell im still on all drums
__________________
1970 mustang coupe

302 bored .030
Holley 650 double pumper
Edelbrock RPM air-~gap intake
Edelbrock RPM nitrous kit
MSD pro billit dist.
MSD 6T and blaster 2 coil
HOOKER headers
2 1/2 inch pipe
flowtech cutouts
2 chamber flowmasters with dumps
3 core radiater
Edelbrock victor series water pump
160 degree stat
KYB shocks (all 4)
lakewood traction bars
powermaster 1 wire alt.
K&N
Click to expand...

Bunch of bucks on go fast and still on drums for controlling it, ah to be young again!
 
M

mustangman70

Founding Member
Dec 30, 2001
1,235
1
0
St pete, Florida
Mar 16, 2006
#23
  • Mar 16, 2006
  • #23
lol what can i say young and stupid i guess......but now im 20....and i REALLY want to convert to disk
 
J

John Z

Founding Member
Sep 21, 2000
581
0
0
Morgantown WV
Mar 16, 2006
#24
  • Mar 16, 2006
  • #24
mustangman70 said:
lol what can i say young and stupid i guess......but now im 20....and i REALLY want to convert to disk
Click to expand...

I'm a founding member of the "I SHOULD HAVE DONE IT BETTER THE FIRST TIME CLUB". I just can not blame it on my youth any more.
 
M

mustangman70

Founding Member
Dec 30, 2001
1,235
1
0
St pete, Florida
Mar 16, 2006
#25
  • Mar 16, 2006
  • #25
Well... i would have loved to have done a disk brake swap years ago....but dammit i had a two barel carb and a old tired 289 hahahahahaha


I will probbly be taking the stang off of the insurance for a while ... i dont want to....for 4 years i have drove this car to orlando a TON of times...drove it to school etc... EVERYONE knows me by this car and EVERY where i go all i get are good comments even though it has some cancer spots.......but it needs work so off it goes... i have a beretta for a beater...and i have the kawasaki (ZX11 ninja) to hold me over for a while

Heres some pics of the beast.... ima miss not driving it and i know its going to take a while

Oh and also.... im going to do AS MUCH of the body work that i can myself























 
J

John Z

Founding Member
Sep 21, 2000
581
0
0
Morgantown WV
Mar 16, 2006
#26
  • Mar 16, 2006
  • #26
I can see your attachment to the car. Since you'll be a bodyman in training, head on over to http://www.autobodystore.com go to the classroom section. Read the basics of basics section by Martin Senour, then join the discussion group. Friendly people, good advice, and reasonable prices on the supplies you will need.
I totally dropped insurance when I was redoing a car. That was a really bad decision. Go to my web site in my signature then select disaster mustang for the page. Not having insurance was one of the stupid things I did in my youth. I think I was 51 at the time. rlol.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

H
New kid on the block
  • HydraX
  • Mar 22, 2025
  • The Welcome Wagon
Replies
17
Views
1K
The Welcome Wagon Mar 22, 2025
HydraX
H
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Engine Power steering pump advice
  • ReefBlueGT
  • Mar 24, 2022
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
3K
Fox 5.0 Mustang Tech Mar 28, 2022
90sickfox
Progress Thread H/C Swap Problems/Ideas
  • sav22rem22
  • Mar 31, 2024
  • Fox 5.0 Mustang Tech
Replies
10
Views
2K
Fox 5.0 Mustang Tech Sep 10, 2024
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?