• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Tranny problems?

  • Thread starter Thread starter nicks199050gt
  • Start date Start date Jun 1, 2009
N

nicks199050gt

Member
Dec 31, 2004
67
0
6
NH
Jun 1, 2009
#1
  • Jun 1, 2009
  • #1
So I was in my car the other day and all of a sudden I had no clutch pedal, could shift from 3rd and4th but it was nearly impossiable. So with the car parked I can go through the gears but if its running I cant shift. Is the tranny junk? or the clutch cable? I was able to stop and go while in 3rd if that makes a difference
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 1, 2009
#2
  • Jun 1, 2009
  • #2
If you had no clutch pedal, you would not be able to shift at all. Did the pedal just get kinda soft? The cable might have started to snap. Otherwise, the pressure plate might be broken.

In any case, restore your pedal feel before assuming the trans is at fault.
 
N

nicks199050gt

Member
Dec 31, 2004
67
0
6
NH
Jun 1, 2009
#3
  • Jun 1, 2009
  • #3
It slowly got soft until it went all the way down. It was grinding a little while I was shiffting. So you think I should start with replacing the cable?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 1, 2009
#4
  • Jun 1, 2009
  • #4
Have someone push the pedal while you watch the fork. If the fork barely moves, inspect the cable. You might find it frayed. If there' a ton of slack in the cable all of a sudden, the cable is probably letting go.

If the fork moves a lot, I'd be thinking that it's more likely a clutch issue.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,265
17,952
224
Massachusetts
Jun 1, 2009
#5
  • Jun 1, 2009
  • #5
I'd look at the cable and clutch pressure plate first.

Cable more than likely is the culprit
 
You must log in or register to reply here.

Similar threads

S
Drivetrain Downshifting from 3rd to 2nd issue
  • Scott_S
  • Apr 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
796
Fox 5.0 Mustang Tech Jun 14, 2026
Mindseye007
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
322
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
439
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
2003 gt, clutch pedal stiffness.
  • 2003 mustang gt modded
  • Feb 15, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
301
1996 - 2004 SN95 Mustang -General/Talk- Apr 17, 2026
2003 mustang gt modded
C
Drivetrain T-5 transmission issue
  • Ch3No2
  • Jul 11, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
384
Fox 5.0 Mustang Tech Jul 18, 2025
2000xp8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?