• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Tranny Question

  • Thread starter Thread starter Georgie
  • Start date Start date Jul 19, 2006
  • 1
  • 2
Next
1 of 2 Next Last

Georgie

New Member
Jul 13, 2005
455
0
0
Montreal, Canada
Jul 19, 2006
#1
  • Jul 19, 2006
  • #1
I finished my AOD to T5 swap a while ago, and everything seems to be well... but when i think back, i recall removing a inspection plate on the AOD. Is their supposed to be one on the T5??? cuz now i can clearly see the flywheel. I'm scared something might get in their....

What can i do??:SNSign:
 

dragnazz5.0

My "0" key d0esn't w0rk, s0 I have t0 use the zer0
Nov 19, 2005
815
5
18
mooresville, nc
Jul 19, 2006
#2
  • Jul 19, 2006
  • #2
yep, there is supp0sed t0 be an inspecti0n c0ver there
 
D

DeVus1

Founding Member
Mar 29, 2002
400
2
28
P-Town, Va.
Jul 19, 2006
#3
  • Jul 19, 2006
  • #3
You better get an inspection cover. You could easily get some debris in there and ruin your transmission.
 

GearHd6

Member
Jul 19, 2005
459
0
18
Ashford, CT
Jul 19, 2006
#4
  • Jul 19, 2006
  • #4
The T-5 block plate is fully covered, it doenst have the inspection cover. You must have re-used the old AOD block plate.
 

LEE93COBRA

New Member
Apr 12, 2000
1,929
0
0
Alabama
Jul 19, 2006
#5
  • Jul 19, 2006
  • #5
GearHd6 said:
The T-5 block plate is fully covered, it doenst have the inspection cover. You must have re-used the old AOD block plate.
Click to expand...


+1
 

Georgie

New Member
Jul 13, 2005
455
0
0
Montreal, Canada
Jul 19, 2006
#6
  • Jul 19, 2006
  • #6
no i got the block plate from summit part #PMA-PA26445 Block Plate, Multi-Fit, Ford, 289-351, with 157 or 164-Tooth Flexplate/Flywheel, Each
 

Georgie

New Member
Jul 13, 2005
455
0
0
Montreal, Canada
Jul 19, 2006
#7
  • Jul 19, 2006
  • #7
ima post a pic soon
 

Georgie

New Member
Jul 13, 2005
455
0
0
Montreal, Canada
Jul 19, 2006
#8
  • Jul 19, 2006
  • #8
here [img=http://img116.imageshack.us/img116/8341/img5522vs9.jpg]
 

Georgie

New Member
Jul 13, 2005
455
0
0
Montreal, Canada
Jul 19, 2006
#9
  • Jul 19, 2006
  • #9
...
 

Attachments

  • img5522vs9.webp
    2.8 KB · Views: 110

Georgie

New Member
Jul 13, 2005
455
0
0
Montreal, Canada
Jul 19, 2006
#10
  • Jul 19, 2006
  • #10
nhtgnm
 

Attachments

  • img5413kj3.webp
    2.8 KB · Views: 145

Georgie

New Member
Jul 13, 2005
455
0
0
Montreal, Canada
Jul 19, 2006
#11
  • Jul 19, 2006
  • #11
shes clean aint she
 

Attachments

  • img5427mf0.webp
    2.8 KB · Views: 135

Georgie

New Member
Jul 13, 2005
455
0
0
Montreal, Canada
Jul 19, 2006
#12
  • Jul 19, 2006
  • #12
oi mate , like my custom stainless brackets?? fork those big ass brakets from flexalite
 

Attachments

  • 25062006087ki1.webp
    2.8 KB · Views: 106

Georgie

New Member
Jul 13, 2005
455
0
0
Montreal, Canada
Jul 19, 2006
#13
  • Jul 19, 2006
  • #13
some ppl think my lights r gay..**** them
 

Attachments

  • dsc08756ds3.webp
    2.8 KB · Views: 119

Georgie

New Member
Jul 13, 2005
455
0
0
Montreal, Canada
Jul 20, 2006
#14
  • Jul 20, 2006
  • #14
bump
 

Georgie

New Member
Jul 13, 2005
455
0
0
Montreal, Canada
Jul 20, 2006
#15
  • Jul 20, 2006
  • #15
so what should i do about the inspection plate???
 

MaroonStangMan

New Member
Mar 9, 2004
2
0
0
Jul 20, 2006
#16
  • Jul 20, 2006
  • #16
Yeah man, I don't know about that plate. I wouldn't want my flywheel exposed like that. You might end up getting debris in your clutch. Your spacer plate should look like this one from 50Resto:



Notice that it is one piece and there is no inspection plate. I looked up your part on summit and this is what it says in the description (I highlighted the important part in bold):

One plate for all of your mounting solutions.
These Performance Automatic multi-fit block plates are designed for all Ford small block engines. They are made from 0.060 in. thick steel and are gold iridited for durability. They work with automatic transmissions and fit both the 157-tooth and 164-tooth flexplates. The plates also feature special ventilation holes for better air circulation.
Click to expand...

If you look at the "Check to make sure this part fits your application" link, it will only confirm that that is an automatic only spacer plate. Sorry man, but it looks like you ordered the wrong part.
 

Georgie

New Member
Jul 13, 2005
455
0
0
Montreal, Canada
Jul 20, 2006
#17
  • Jul 20, 2006
  • #17
read http://img213.imageshack.us/img213/297/img5413kj3.jpg
 
J

JADITO

New Member
Jun 13, 2005
4
0
0
Jul 20, 2006
#18
  • Jul 20, 2006
  • #18
 

Attachments

  • img5413kj3.webp
    2.8 KB · Views: 140

Georgie

New Member
Jul 13, 2005
455
0
0
Montreal, Canada
Jul 20, 2006
#19
  • Jul 20, 2006
  • #19
read bro...i called lrs and they told me they no longer offer that product
 

Attachments

  • img5413kj3.webp
    2.8 KB · Views: 140

MaroonStangMan

New Member
Mar 9, 2004
2
0
0
Jul 20, 2006
#20
  • Jul 20, 2006
  • #20
That picture is where I got your part number from and yes, I did see that it said the plate was for manual tranny's as well. I was going off of what summit racing's website had to say about it because I'd much sooner trust them with information.

I'd call Performance Automatic. It looks like ****ty product for either transmission if there isn't supposed to be something there. How many cars have you seen that drive around with their flywheels and clutches exposed to the elements like that? It doesn't make sense that they don't provide an inspection plate unless you are supposed to reuse your old one or replace it with new stock. That is the only solution I can think of unless you feel like tearing everything off again and replacing it with the correct spacer plate.

Just imagine the clutch slippage if you ever had to drive this car in the rain...
...or if something were to fly up in there and bust teeth off of your flywheel.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

K
3.8 T5 & Bellhousing to 1987 Lincoln 5.0
  • ks65stang
  • Mar 2, 2026
  • Other Auto Tech
Replies
3
Views
575
Other Auto Tech Mar 3, 2026
Noobz347
Engine Code 41 again
  • Creomod
  • Jul 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
868
Fox 5.0 Mustang Tech Jul 11, 2026
Mcmahst
K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
240
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Electrical Code 29 again
  • Creomod
  • Jul 31, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
395
Fox 5.0 Mustang Tech Aug 3, 2026
Creomod
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?