• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

tranny question!!

  • Thread starter Thread starter 87Mustang351
  • Start date Start date Jul 25, 2006

87Mustang351

Member
Sep 12, 2005
220
1
16
Canada, Nova scotia, Cape Breton
Jul 25, 2006
#1
  • Jul 25, 2006
  • #1
Hey guys as u know i think i may have found my shake, my driveshaft yoak wiggles in my trans, i removed my trans and i can wiggle the whole main shaft, thats why i thought my yoak was moving around but it is the main shaft, so this is most likely the bushing?

is it suspoed to wiggle? i would think not
 

87Mustang351

Member
Sep 12, 2005
220
1
16
Canada, Nova scotia, Cape Breton
Jul 25, 2006
#2
  • Jul 25, 2006
  • #2
come on i know you guys know something
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jul 25, 2006
#3
  • Jul 25, 2006
  • #3
you say wiggle do you mean you can rotate driveshaft left or right as if the tranny was turning it and hear a clunck in the rear differential if you rotate back and forth by hand if so this is normal to have about 1/4 in play rotating the driveshaft left or right in gear or out of gear for a manual. when or what happened to cause this vibration...and what size rims and tires do you have...
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Jul 25, 2006
#4
  • Jul 25, 2006
  • #4
Well the mainshaft and input shaft will both wiggle with the trans out of the car. You need to slip the driveshaft into place in the rear and then check for play.
 

87Mustang351

Member
Sep 12, 2005
220
1
16
Canada, Nova scotia, Cape Breton
Jul 25, 2006
#5
  • Jul 25, 2006
  • #5
yes i had the drive shaft in everythign was bolted up and i can move the yoak up and down like wiggle it, not turn it, i have 16" ponys with 4 245/50 i checks my buddys 86 mustang 5.0 and his didnt move inside of his trany and mine wiggles around
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jul 25, 2006
#6
  • Jul 25, 2006
  • #6
no its not supposed to do that.just a good guess but you can go to autozone and for about $13 they sell a rear seal gasket kit which contains a rear tail housing bushing which slides into tailshaft after you remove the old one which may be bad the drive shaft yolk will slide into this bushing once its installed into the tranny the bushing sits right behind the rear seal you might want to remove it and look at it before purchasing.but if it is not that it may be something inside the tranny....goodluck.
 

87Mustang351

Member
Sep 12, 2005
220
1
16
Canada, Nova scotia, Cape Breton
Jul 25, 2006
#7
  • Jul 25, 2006
  • #7
my first gear is popping out so i am taking it to get fixed and gettimg them to do the bushing as well thank you very much for your help
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jul 25, 2006
#8
  • Jul 25, 2006
  • #8
also how does the inside teeth within the yolk and check the diameter look see picture for reference this is a 94-95 driveshaft for a t-5 i believe everything is the same as yours except length.

View attachment 453011
View attachment 453013
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jul 25, 2006
#9
  • Jul 25, 2006
  • #9
87Mustang351 said:
my first gear is popping out so i am taking it to get fixed and gettimg them to do the bushing as well thank you very much for your help
Click to expand...
o.k. keep us posted of outcome....thanks.
 
You must log in or register to reply here.

Similar threads

J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
347
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
Drivetrain Tail Shaft bore odd shape
  • R82148V
  • Jun 12, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
207
Fox 5.0 Mustang Tech Jun 13, 2026
Mustang5L5
S
Car shakes when taking off help???
  • STANKYstangs
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
564
1996 - 2004 SN95 Mustang -General/Talk- May 27, 2026
LILCBRA
C
Drivetrain T-5 transmission issue
  • Ch3No2
  • Jul 11, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
497
Fox 5.0 Mustang Tech Jul 18, 2025
2000xp8
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
903
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?