boosted95 New Member Sep 7, 2005 5 0 0 Wellsville, PA Sep 8, 2005 #1 Sep 8, 2005 #1 I'm doing a tranny swap in a 95 GT. I'm getting a Tremec TKO600, bellhousing, centerforce clutch, 31 spline yolk, steeda clutch cable assembly, Spec aluminum flywheel, and FMS aluminum drive shaft. Any suggestions to what else i will need?
I'm doing a tranny swap in a 95 GT. I'm getting a Tremec TKO600, bellhousing, centerforce clutch, 31 spline yolk, steeda clutch cable assembly, Spec aluminum flywheel, and FMS aluminum drive shaft. Any suggestions to what else i will need?
S Starman New Member May 27, 2005 78 0 0 Sep 9, 2005 #2 Sep 9, 2005 #2 5/8" driveshaft spacer and a shorter clutch fork (I think a Fox one will work)
WhiteDevil New Member Feb 4, 2003 2,717 0 0 San Diego Sep 9, 2005 #3 Sep 9, 2005 #3 Starman said: 5/8" driveshaft spacer and a shorter clutch fork (I think a Fox one will work) Click to expand... Yup and 3 quarts of GM Syncromesh and the correct speedo gears for your rear gear ratio.
Starman said: 5/8" driveshaft spacer and a shorter clutch fork (I think a Fox one will work) Click to expand... Yup and 3 quarts of GM Syncromesh and the correct speedo gears for your rear gear ratio.
S Starman New Member May 27, 2005 78 0 0 Sep 9, 2005 #4 Sep 9, 2005 #4 plus 3 more qts of synchromesh for the fluid change after the 500 mile break-in