JenkinsBS Founding Member Apr 16, 2002 1,001 1 39 Washington Mar 21, 2004 #1 Mar 21, 2004 #1 what size and how is the setup for the bellhousing to transmission bolts? theres no threads in the 4 holes that go there... are they held in by bolts on the backside or what? need help asap please!! brian
what size and how is the setup for the bellhousing to transmission bolts? theres no threads in the 4 holes that go there... are they held in by bolts on the backside or what? need help asap please!! brian
Starscream88 New Member Mar 8, 2003 1,277 1 0 Park Ridge NJ Mar 21, 2004 #2 Mar 21, 2004 #2 The 4 threads are in the bellhousing side, not the Tranny side, If there not there then you have a problem
The 4 threads are in the bellhousing side, not the Tranny side, If there not there then you have a problem
86T-Top Founding Member Jun 29, 2001 553 0 17 Dublin, PA Mar 21, 2004 #3 Mar 21, 2004 #3 I don't know what size the bolts are, but they thread into the bellhousing. There is not nut on the inside of the bellhousing to hold the bolts. Mario
I don't know what size the bolts are, but they thread into the bellhousing. There is not nut on the inside of the bellhousing to hold the bolts. Mario