• Mustang Forums
  • 1974 - 1978 Mustang II Talk & Tech

Transmission crossmember differences

  • Thread starter Thread starter benny2
  • Start date Start date Jul 26, 2021
B

benny2

Member
Jul 26, 2021
1
2
13
Minnesota
Jul 26, 2021
#1
  • Jul 26, 2021
  • #1
Hi guys, I'm a new member and happy to be here. I have a 74 mustang which I am currently in the process of swapping the rad-4 4 speed in instead of the original c3. I was wondering if their is a difference between the auto/manual transmission mount/ crossmember. The manual is in right now and it looks a little off center with the c3 crossmember. Thanks guys.
 
Reactions: Enzio and 2Blue2

extra_stout

5 Year Member
Aug 27, 2018
822
934
113
Germany
Jul 27, 2021
#2
  • Jul 27, 2021
  • #2
Hi Benny,
I reused the dual hump crossmember on my 74 V6 for my V8/T5 tranny swap. At one point I was also thinking that it looks offset, but is running fine (if it has enough fuel and spark, but that is another story).
I have this link for you: http://www.mustangii.org/tech/tipsntricks/302swap.shtml
It seems like the crossmember can be used for everything: V6, I4 and V8. This also makes sense because Ford doesn't want to make parts twice (to save money).
 
Reactions: 2Blue2

2Blue2

will be trying this sex one when I can find it
Mod Dude
Mar 5, 2019
4,430
2,893
163
Oahu
Jul 27, 2021
#3
  • Jul 27, 2021
  • #3
Welcome on Benny2
Post a pic of your car please.
We live for that.
 

LILCBRA

I wish I didn't have all of these balls in the air
Mod Dude
Dec 6, 2005
6,403
5,387
194
Corn County USA
Jul 27, 2021
#4
  • Jul 27, 2021
  • #4
Welcome to Stangnet!!

The transmission crossmembers are all interchangeable from the best of my knowledge. I've used different ones in different cars with no problems. The transmission looking like it's offset could be that the engine is also offset. I know the 302s are, they're like an inch or so off center to the left IIRC. I don't know if V6s or the 4 bangers are or not, but as @extra_stout says they don't want to spend a bunch of money on parts where they don't need to so I wouldn't rule that possibility out.
 

Enzio

Dang it. I was hoping mine would get 3 more inches
5 Year Member
May 14, 2019
1,054
840
133
Minnesota
Jul 27, 2021
#5
  • Jul 27, 2021
  • #5
Welcome to the site!
 
You must log in or register to reply here.

Similar threads

Mustang II 4 cyl gear hunting and possibly messed up vacuum system
  • oesterreicher
  • May 31, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
11
Views
316
1974 - 1978 Mustang II Talk & Tech Jun 14, 2026
manicmechanic007
P
New here
  • PortCity
  • Jun 9, 2026
  • The Welcome Wagon
Replies
2
Views
103
The Welcome Wagon Jun 9, 2026
AeroCoupe
B
Issue with trans mount not lining up with crossmember slots
  • Bbaker2317
  • Mar 16, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
841
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 20, 2025
limp
C
SN95 Another Coyote swap list
  • catkiller
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
137
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2026
catkiller
C
J
For Sale MASTER LISTING: Abandoned '66 Mustang Restomod Part-Out (Wilwood, Ididit, Quick Performance, Mishimoto)
  • JasonB66
  • Jul 23, 2026
  • Suspension
Replies
0
Views
81
Suspension Jul 23, 2026
JasonB66
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1974 - 1978 Mustang II Talk & Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?