• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

transmission install help

  • Thread starter Thread starter SAKKI
  • Start date Start date Dec 31, 2005
S

SAKKI

New Member
Aug 25, 2005
9
0
0
Dec 31, 2005
#1
  • Dec 31, 2005
  • #1
hey guys i am in the market for a new tranny and clutch, i have a 91 mustang lx lightly modified, i saw the Ford Racing Cobra R Tremec 5-Speed HD Transmissions and thought that might be a good trans to go with, some questions though, do i need to modify anything to get that to fit, summit racing says to order a new crossmember with the tranny but ford racing says nothing about that. also which clutch should i go for and should i replace throwout bearing, bell housing and cable since i am doing this job? any recommenadations would be great .
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Dec 31, 2005
#2
  • Dec 31, 2005
  • #2
See http://www.ttcautomotive.com/ for more information on these transmissions. Also see http://www.ddperformance.com & http://www.hanlonmotorsports.com/. I recommend that you purchase your trans from either Hanlon or D&D Performance. Hanlon's website isn't much, but Karen at Hanlon is very good. I have dealt with both companies and have been pleased with the service. Tell them what you are doing and you want to buy all the parts to do it from one place. They know exactly what you need and will sell it to you at a price equal to or better than Summit.

The Tremec will require a new bell housing. Depending on the model, it will require a different clutch disk with a 26 spline hub and a different driveshaft yoke.

The Tremec will require a modification to the existing crossmember or a new crossmember. To modify your existing crossmember, grind off the tack welds that hold the crossmember to the tubes that hold the outer mount bolts. Then you can slide the crossmember aft and install the trans. Once the trans is in place, have the crossmember tack welded again.

For a street car, get a FMS King Cobra clutch assembly. It comes with a new throwout bearing. I recommend that you get a new clutch cable & quadrant. Get a firewall cable adjuster so that you can adjust the clutch without getting under the car. Be sure to get the clutch cable, quadrant and firewall adjuster from the same manufacturer so that they all fit and work together.
.
 
You must log in or register to reply here.

Similar threads

T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
328
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
4
Drivetrain Wilwood Clutch and Brake Pedal Combo Installation - Help
  • 427stang
  • Jul 8, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
127
Fox 5.0 Mustang Tech Jul 8, 2026
427stang
4
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
725
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
M
85 Capri 5.0 transmission rattle
  • Mamaclean
  • May 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
257
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 17, 2026
Mamaclean
M
R
Drivetrain Clutch
  • Robman8028
  • Jun 29, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
363
Fox 5.0 Mustang Tech Jul 2, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?