• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Transmission strength

  • Thread starter Thread starter Cobra_Dusten
  • Start date Start date Dec 23, 2008

Cobra_Dusten

Member
Aug 7, 2005
246
0
16
Marysville, Wa
Dec 23, 2008
#1
  • Dec 23, 2008
  • #1
This has to have been covered. I have spent the last 45 minutes searching, and i feel like a ****ing retard because i cant find the answer.

What is the limit of the stock T-5.

I just bought an 89 vert. I love drag racing. The rear has an auburn, and 31spline shafts with 5 lugs.
The car has SFC welded in, with a 6 pt cage welded in. the old owner replaced the motor and trans that were in it(it was his race car) with a stock motor out of a 93 SSP with the matching trans. I plan to throw a GT-40 intake, heads, and E cam in it and daily drive it. But it will see the track. Is the trans going to live with clutch dumps and slicks?
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Dec 23, 2008
#2
  • Dec 23, 2008
  • #2
Probably not. The stock T5 WC is good to about 300 ft lbs. Hard launches and shifts spell death for those transmissions...
Kevin
 

Cobra_Dusten

Member
Aug 7, 2005
246
0
16
Marysville, Wa
Dec 23, 2008
#3
  • Dec 23, 2008
  • #3
i didnt figure as much. guess track duties will have to wait till an upgrade goes in.
 

FastDriver

I was uncomfortably high & wearing a helmet
SN Certified Technician
Sep 5, 2001
6,238
2,942
224
Vass, NC
Dec 23, 2008
#4
  • Dec 23, 2008
  • #4
I blew mine up making 320 rwhp/ 340rwtq with an n/a 302. I powershifted to 3rd and like John Madden says, "BOOM!"

Chris
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Dec 23, 2008
#5
  • Dec 23, 2008
  • #5
I've done it on a 1-2 shift with a stock engine which is unusual, since it's usually the 2-3. Just a loud "boom! crunch, crunch, crunch."
 

parrish5o

New Member
Dec 22, 2008
2
0
0
Dirty South
Dec 23, 2008
#6
  • Dec 23, 2008
  • #6
The stock trans was the first thing to go in mine. All it took was an NOS stageII kit and slicks. First run was a 13.4 and the second was more than it would take. I am now running mid to low 11s with a Tremec TKO and so far no problems.
 

h8my408

Member
Aug 27, 2007
93
0
7
Houston, Tx
Dec 24, 2008
#7
  • Dec 24, 2008
  • #7
Ive done the Madden 2-3 shift myself! Boom! That transmission's gotta be lopsided after that one!

I had a stock longblock 351w with carb retro gear, made 220hp and 305tq at the wheels.
It was a 2.3 turbo tranny. Great gearing, bad strength.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Dec 24, 2008
#8
  • Dec 24, 2008
  • #8
You can snap a T-5 in a stock Mustang with a good launch
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Dec 24, 2008
#9
  • Dec 24, 2008
  • #9
Remember this, a good t5 has some value to it, a broken one is worth $100 or less depending on what you broke.
So if you know you are going to replace it, go easy on it so you can get the most money back out of it.
Something my dumbass didn't do.
So instead of getting $500 for it, i got $100.
 

88mouse

New Member
Apr 18, 2007
630
0
0
Mooresville nc
Dec 24, 2008
#10
  • Dec 24, 2008
  • #10
Never broke a t5 at the track. Always broke them going to the track or coming home..lol

While yours is still good have it rebuild to g force spec's.
 

Cobra_Dusten

Member
Aug 7, 2005
246
0
16
Marysville, Wa
Dec 25, 2008
#11
  • Dec 25, 2008
  • #11
88mouse said:
Never broke a t5 at the track. Always broke them going to the track or coming home..lol

While yours is still good have it rebuild to g force spec's
.
Click to expand...

how much stronger than stock is this?
 

StinkinLincoln

Member
Dec 9, 2006
240
0
17
Louisiana
Dec 25, 2008
#12
  • Dec 25, 2008
  • #12
depends on what you are going to do with the car.
imo the tko is going to be stronger for drag racing.
 

Boostedpimp

20+ Year Stangneter
May 8, 2003
1,451
493
154
NJ
Dec 26, 2008
#13
  • Dec 26, 2008
  • #13
Ran through 3 t5's in a stock 90lx with a good tire and some power shifting... haven't had any issues with the few tremecs i've used.. I'd say sell the T5 and go wtih something else while it's still good like others suggested
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Dec 26, 2008
#14
  • Dec 26, 2008
  • #14
+1 for killing T5s on the 2-3 shift. I've done it twice in my car, and I'm still not over the 300 hp mark. Did it once with a completely stock engine.

G Forces are good for 4-500 Ft-lb ratings depending on the model you buy. I've rode in a G-Force car before, those things are pretty tough. I want to say that was a 10 second car, but I can't remember now. I thought I heard that G Force trannys are no longer made new, but I can't verify that.

Check out Astroperformance.com - Your Manual Drivetrain Specialist. The T5 I've got in my car now is a "Cobra" spec built by Astro... Good stuff. They are pretty helpful on the phone, kinda have the small-shop personality, but sometimes can be hard to get a hold of. Hopefully they've hired a secretary since. Anyway, they have some pretty sweet options for T5 builds, and they carry this "A5" line that can handle 650HP.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Dec 26, 2008
#15
  • Dec 26, 2008
  • #15
For an aftermarket tranny, the G-force is the way to go.

The T-5 is lightest of all the Tremec/Borg-Warner designed transmissions. It also shifts the best IMHP and i'm sure many will agree. It's problems have always been strenght and now for the price of a 3550 you can cure that and make it plenty strong. PLUS, it's easy as hell to rebuild a T-5. They are one of the best designed manuals in terms of service.

Pretty much the weakest points to the t-5 are the mainshaft flexing and shearing teeth off 3rd gear. So g-force has a stronger mainshaft and stronger gears (the teeth are beefy as hell). Just those two little changes increases strenght A LOT!
 

Cobra_Dusten

Member
Aug 7, 2005
246
0
16
Marysville, Wa
Dec 26, 2008
#16
  • Dec 26, 2008
  • #16
thanks for the input guys, maybe i will just look into having the T5 upgraded
 

88mouse

New Member
Apr 18, 2007
630
0
0
Mooresville nc
Dec 30, 2008
#17
  • Dec 30, 2008
  • #17
We ran a g force t5 behind a 347 with a 150 shot all last year, and about two months ago I put the same tranny behind my HCI 302 still shifts and works like it did the day we brought it home.
 
You must log in or register to reply here.

Similar threads

Progress Thread Roll cage and LS swap?????
  • 78mIIman
  • Dec 30, 2024
  • 1974 - 1978 Mustang II Talk & Tech
Replies
2
Views
351
1974 - 1978 Mustang II Talk & Tech Mar 30, 2025
greenflash79
For Sale Borg Warner WC T5, Stock Bell Housing, RAM Clutch Set, Double Hump Cross Member, & Pro 5.0 Shifter
  • AeroCoupe
  • Aug 9, 2025
  • Drivetrain Parts
Replies
3
Views
977
Drivetrain Parts Sep 7, 2026
AeroCoupe
SOLD SOLD!!!! 1993 Notchback Roadracer For Sale. She's a beast!
  • Boydster
  • Apr 25, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
1K
Fox Body Mustangs For Sale (1979-93) Apr 25, 2025
Boydster
WTB/Trade Looking for a T-Top Hatch. Possible convertible trade? (Rhode Island)
  • 7upper
  • Mar 18, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
410
Fox Body Mustangs For Sale (1979-93) Mar 18, 2025
7upper
H
Drivetrain 4R70W clutch friction/metals/piston set up questions for transmission guru
  • Hizdudeness
  • Apr 4, 2024
  • Fox 5.0 Mustang Tech
Replies
2
Views
1K
Fox 5.0 Mustang Tech Nov 15, 2024
slow84lx
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?