Trickflow or F cam...decisions decisions

Use Comp Cams Part # 35-312-8. It will work better than either of the cams you listed or have if you are going to be using a blower or turbo. I have used this particular cam on 4 different builds and it makes sick power and torque in boosted applications. 3 of the builds were 331 cid engines, and one was a N/A 306 that ran low 12's. The 306 cid engine had a bit of a lope at idle, the 331 cid engines idled smoother, but not dead smooth. One of the 331 engines is running 15 psi and is making 535 rwhp and 575 rwtq. on pump gas and only 25 degrees of total timing. The key is not using a cam with 112*LSA in boosted applications, but use a cam with at least 114*LSA.

well I am running a trickflow stage 2 cam with an s -tri making 540 rwhp with the only other mods are AFRs and BBK SSI intake....I would go trickflow