TrickFlow TrackHeat Manifold?

[Ryan91Saleen]

would this be a good manifold for my setup? and how much more power would i get from this?

 

[TIMMY2734]

id stay with the gt40/cobra manifolds unless you plan on changing your heads. The street heat may work fine too

 

[Ryan91Saleen]

will the cobra manifold work well with the b-303 cam?

 

[Ryan91Saleen]

the track heat is from 1200 to 6500 i think is what it is that is close to my cam.. come on guys i need to know by 11:00 today i need to order it...

 

[88STANGCONVERT]

I would say that the Cobra would run better for now, but if you ever plan on getting a set of heads then maybe now would be a good time to get an intake. Be smart.
Your Daddy

 

[gungfusemaj]

YOU COULD ALSO GET THE STREET KIT AND CHANGE OUT THE UPPER MANIFOLD WHEN YOU GET NEW HEADS BUT UNTIL YOU GET NEW HEADS AND A NEED FOR MORE AIR THE TF TRACK UPPER COULD HURT JUST A LITTLE. HAD COBRA AND WENT TO TF TRACK AND GAINED 48HP ON DYNO BEFORE I GOT NEW HEADS AND WENT TO ELD.VICTOR OH YEAH..........TF IS GOOD SHT REGARDLESS WHAT OTHER PEOPLE SAY IF, SETUP IS RIGHT YOU WILL RUN LIKE A RAPED APE, IF YOU ARE SET ON TRICKFLOW FOR SOME REASON GET THE PACKAGE THAT SUMMIT RACING HAS http://www.summitracing.com/catalogs/bigbook/2004/marapr/t138.html

NOT A BAD SETUP FOR 2 LARGE.

 

[Ryan91Saleen]

so trickflow track heat or cobra?

 

[blown1989saleen]

your wasting your money if your heads are stock, your gonna see VERY minimal gains with a aftermarket intake, especially the track heat. ive been there, i bought GT40 intake 8yrs ago and i noticed NOTHING cause the rest of the motor was basically stock. if you absolutley have to buy a intake leave the track heat alone and get the street heat.


Scott