• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-

Trouble starting 66 Mustang

  • Thread starter Thread starter Joeny
  • Start date Start date May 7, 2023
J

Joeny

New Member
Oct 26, 2022
6
0
1
New York
May 7, 2023
#1
  • May 7, 2023
  • #1
Hi everyone,

I have a 66 Mustang 200ci that I can't get started, ill give you a quick rundown. The car sat for a few years and I have been working to get it back up and running. I have a new batter, solenoid, starter, coil, and fuel in the carb. the engine is a TDC and I can't get it to start. It will crank all day but won't start, there is voltage to the plugs and coil but won't start any suggestions would be greatly appreciated.
 

nickyb

I gotta say i never painted my nuts, Never Ever
15 Year Member
Apr 3, 2009
2,979
1,626
153
nevada
May 7, 2023
#2
  • May 7, 2023
  • #2
You say the plugs are getting spark, what about fuel?How's the points?condeser?
 
J

Joeny

New Member
Oct 26, 2022
6
0
1
New York
May 7, 2023
#3
  • May 7, 2023
  • #3
Yes I did the spark plug on the manifold yes and saw the spark, I’m using a phoenix electrical wither the distributor.
 

Mr.Kelley

Active Member
Aug 9, 2019
194
117
53
San Diego Ca
May 8, 2023
#4
  • May 8, 2023
  • #4
Recheck your basics. Fuel, static timing, firing order. The video sounds like it wants to just not quite. Did you do a compression check. Try a squirt of starting fluid or brake / carb cleaner while cranking. If it fires or runs on spray the carb is gummed up.
 
You must log in or register to reply here.

Similar threads

8
Electrical Crank-no start ... no spark ... no injector pulse, was it something I did? (redux)
  • 85gtCOBRA
  • Oct 28, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
530
Fox 5.0 Mustang Tech Oct 29, 2025
85gtCOBRA
8
P
Repeated P2004 DTC trouble code with no apparent symptoms
  • poehitman
  • Mar 11, 2026
  • SN95 V6 Mustang Tech
Replies
2
Views
164
SN95 V6 Mustang Tech Mar 12, 2026
poehitman
P
F
1986 mustang no start
  • foxyjamss221
  • Oct 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
303
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 13, 2025
foxyjamss221
F
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
187
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
M
85 mustang 5.0 cranking in run position
  • Mamaclean
  • May 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
117
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?