• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Trouble starting after Kennebell Install

  • Thread starter Thread starter goshia
  • Start date Start date Jun 10, 2007

goshia

New Member
Jul 1, 2005
252
0
0
Mead, Colorado
Jun 10, 2007
#1
  • Jun 10, 2007
  • #1
I have finished my install but the car won't start.

The starter is doing everything it can but it just won't fire up?

I sanded the connector for the chip real well... No dashes on the odometer. intercooler pump working properly. No Leaks any where.
 

JBushman73

Founding Member
Aug 29, 2001
172
0
0
Roanoke, VA
Jun 10, 2007
#2
  • Jun 10, 2007
  • #2
Keep sanding the chip and MAKE SURE ALL connections to the computer are snug. The same thing happened to me when I installed my Pcharger.
 

blkhorse

Founding Member
Oct 30, 1999
345
1
18
Jun 10, 2007
#3
  • Jun 10, 2007
  • #3
double check your bap wiring,also a common problem
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Jun 10, 2007
#4
  • Jun 10, 2007
  • #4
That things gonna be an animal when you finally get it running.
 

goshia

New Member
Jul 1, 2005
252
0
0
Mead, Colorado
Jun 10, 2007
#5
  • Jun 10, 2007
  • #5
blkhorse said:
double check your bap wiring,also a common problem
Click to expand...

So as for the bap wiring I did not connect the two wire that run up to the engine compartment. I thought those where for the fuel gauge and I have a Auto Meter.

Do I need to something with those 2 wire?
 

blkhorse

Founding Member
Oct 30, 1999
345
1
18
Jun 10, 2007
#6
  • Jun 10, 2007
  • #6
please read the instructions carefully,those two wires go to the boost switch which must be hooked up(raises fuel pump voltage to 17 under boost).if you did not know what these were for, there is a good chance you wired it wrong.do you hear the fuel pump run for about 2 secs after you turn key on?
 

TweekedGT

New Member
Jul 22, 2004
1,274
0
0
Alberta
Jun 10, 2007
#7
  • Jun 10, 2007
  • #7
Do you have your MAF plugged in? That happened to me when I forgot to hook up my MAF.
 

goshia

New Member
Jul 1, 2005
252
0
0
Mead, Colorado
Jun 10, 2007
#8
  • Jun 10, 2007
  • #8
TweekedGT said:
Do you have your MAF plugged in? That happened to me when I forgot to hook up my MAF.
Click to expand...

I did have that plugged in. I think it might be the BAP wiring....
 

the98stang

Active Member
Aug 12, 2005
2,408
0
47
Clovis, CA
Jun 11, 2007
#9
  • Jun 11, 2007
  • #9
Check all electrical connections (IAC, IAT, TPS etc) and all the vac/boost hoses.
 

jivepepper

Founding Member
Jun 19, 2002
776
5
18
Under a Sombrero. in WV.
Jun 11, 2007
#10
  • Jun 11, 2007
  • #10
TweekedGT said:
Do you have your MAF plugged in? That happened to me when I forgot to hook up my MAF.
Click to expand...

Mine will start with the maf unhooked. Just throws a A check engine light.
 

Mossberg

Active Member
Jul 21, 2003
0
1
36
ATL, Shawty
Jun 11, 2007
#11
  • Jun 11, 2007
  • #11
I believe some KB owners received a corrupted chip. I would see if KB can send you another.
 
You must log in or register to reply here.

Similar threads

M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
177
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
T
2003 GT cluster issue
  • Timothys gourmet
  • Aug 26, 2025
  • SN95 4.6L Mustang Tech
Replies
3
Views
282
SN95 4.6L Mustang Tech Aug 28, 2025
Mustang5L5
N
Engine 86 GT no start/stall
  • nweber
  • Jul 28, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
275
Fox 5.0 Mustang Tech Jul 29, 2026
AeroCoupe
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
478
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
584
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?