• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Trunk Battery Power Loss????

  • Thread starter Thread starter Shirley
  • Start date Start date Sep 29, 2005
S

Shirley

Founding Member
Nov 14, 2001
112
0
0
Phoenix, AZ
Sep 29, 2005
#1
  • Sep 29, 2005
  • #1
I just installed a battery relocation kit in the rear passenger side of the trunk. It came with 20ft. of 2 gauge welding cable, and a 4 gauge for the ground cable. I am utilizing three ground points. Two in the spare tire well, and I kept the original ground cable that grounds to the block. She starts okay at first, but if I drive anywhere, park, and restart the car, it barely cranks over. My question is: How much resistance is building up due to the huge length of the + cable. My buddy said I should hook up a 250 amp fuse to the + cable. Anything else I could do for safety. Not concerned about being track legal right now. thanks
 
S

Shirley

Founding Member
Nov 14, 2001
112
0
0
Phoenix, AZ
Sep 29, 2005
#2
  • Sep 29, 2005
  • #2
come on guys, I know a bunch of u have done this b4. What was the method to your madness?
 

mattkimsey

I've compiled a list to recap this thread:
Jan 22, 2004
346
0
0
Bessemer City NC
Sep 29, 2005
#3
  • Sep 29, 2005
  • #3
OT: did you have to take the spare tire out to mount the battery?
 
S

Shirley

Founding Member
Nov 14, 2001
112
0
0
Phoenix, AZ
Sep 29, 2005
#4
  • Sep 29, 2005
  • #4
I don't have a spare in the first place, but you could snake the wires around the tire, but I would wire it dfferently if I had a spare tire.
 

mattkimsey

I've compiled a list to recap this thread:
Jan 22, 2004
346
0
0
Bessemer City NC
Sep 29, 2005
#5
  • Sep 29, 2005
  • #5
cool...bump 4 u
 

1EVIL88VERT

New Member
Jul 12, 2004
314
0
0
Dyess AFB, TX
Sep 29, 2005
#6
  • Sep 29, 2005
  • #6
try double checking all your grounds, make sure their is no paint or dirt where you ground it. also make sure all the connections are tight. i had the same problem with mine when i did it. i ended up testing four different ground points in the trunk before i found a good one
 
L

luckythirteen13

New Member
Jul 19, 2005
648
0
0
Anaheim, CA
Sep 29, 2005
#7
  • Sep 29, 2005
  • #7
try upgrading the ground to a gauge. also, what alt. are you using? if stock, that could be the problem. when i put my battery in the trunk the stock alternator took a dump, it was just too much for it. everyone said i just didnt wire it up right but i know i did. i bought a 150amp alternator in hopes to fix the problem and i have absolutely no charging problems at all now
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Sep 29, 2005
#8
  • Sep 29, 2005
  • #8
JRICHKER (SP?)has a good write up on battery re-location issues. I would search for his name or the key word battery and you will find his post.

Good luck,

P.S. as a general rule most grounds should be 18" or shorter
 
S

Shirley

Founding Member
Nov 14, 2001
112
0
0
Phoenix, AZ
Sep 29, 2005
#9
  • Sep 29, 2005
  • #9
awesome thanks guys. I guess its time to upgrade the ol alternator
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 29, 2005
#10
  • Sep 29, 2005
  • #10
Rear mounted battery ground wiring. Follow this plan and you will have zero ground problems.

One 1 gauge or 1/0 gauge wire from battery negative post to a clean shiny spot on the chassis near the battery. Use a 5/16” bolt and bolt it down to make the rear ground. Use a 1 gauge or 1/0 gauge wire from the rear ground bolt to a clean shiny spot on the block.

One 4 gauge wire from the block where you connected the battery ground wire to the chassis ground where the battery was mounted up front. Use a 5/16” bolt and bolt down the 4 gauge engine to chassis ground, make sure that it the metal around the bolt is clean & shiny. This is the alternator power ground.

Crimp or even better, solder the lugs on the all the wire. The local auto stereo shop will have them if the auto parts store doesn't. Use some heat shrink tubing to cover the lugs and make things look nice.

The computer has a dedicated power ground wire with a cylindrical quick connect (about 2 ½”long by 1” diameter. It comes out of the wiring harness near the ignition coil & starter solenoid (or relay). Be sure to bolt it to the chassis ground in the same place as you bolted the alternator power ground. This is an absolute don’t overlook it item for EFI cars
 
You must log in or register to reply here.

Similar threads

C
Wiring a battery relocated to trunk
  • Ch3No2
  • Jan 24, 2023
  • Fox 5.0 Mustang Tech
Replies
8
Views
4K
Fox 5.0 Mustang Tech Jan 25, 2023
AeroCoupe
For Sale 3-owner 1987 Mustang GT, $18K obro, Lancaster CA
  • Bill Cool
  • Oct 6, 2024
  • Fox Body Mustangs For Sale (1979-93)
Replies
4
Views
2K
Fox Body Mustangs For Sale (1979-93) Oct 13, 2024
nickyb
K
Electrical charging issue
  • knucklehead11
  • Jul 15, 2024
  • SN95 V6 Mustang Tech
Replies
5
Views
1K
SN95 V6 Mustang Tech Jul 16, 2024
Mcmahst
Electrical Starter blowing mega fuse to trunk battery
  • Waz900
  • Jun 27, 2022
  • Fox 5.0 Mustang Tech
Replies
18
Views
6K
Fox 5.0 Mustang Tech Oct 27, 2023
Rdub6
Fuel Fuel Pump Rewire, New Fuel Lines, and Installation of New Fuel Pump Hanger with AN6 Connections
  • AeroCoupe
  • Mar 12, 2023
  • Fox 5.0 Mustang Tech
  • 2
Replies
33
Views
14K
Fox 5.0 Mustang Tech Apr 16, 2023
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?