tUBULAR K MEMBER

[SQUEEZE&STROKE]

Does anyone know the stock measurements for a 94/95 mustang motor mount perch? I have a tubular k member from a 98 cobra. I was going to put a 4v modular motor in my car but I have decided to stay with good old pushrod power but the motor mount perchs dont line up exactly. I cant take the k member back because its used and I bought it from my friend. Any help would be greatly appreciated. I was thinking about turnung my motor mounts around (switching sides) but it would still be off a little.

Maybe I'll just sell it. any one looking for a D&D motorsports 4.6 tubular k member-I'm in so cal area, or better yet any one looking to trade for a 5.0 k member?

 

[stangman]

measurements in regard to what? from side to side....distance between, etc......

 

[SQUEEZE&STROKE]

measurements in regard to what? from side to side....distance between, etc......

Side to side, height off of k member, distance from the front of the car...I really just want the motor to fit in its stock loation, if it is lower than normal thats ok, but i dont want to have to have a custom exhaust and driveshaft made.

 

[stangman]

Side to side, height off of k member, distance from the front of the car...I really just want the motor to fit in its stock loation, if it is lower than normal thats ok, but i dont want to have to have a custom exhaust and driveshaft made.

well i just helped my next door neighbor do his k-member yesterday. i'll see if i can take a couple measurements later, he's not home right now

 

[SQUEEZE&STROKE]

Thanks alot, Is his car a 94/95 car by chance...Once again thanks for all your help-jeff

 

[tomustang]

rainbow sig...

Try asking in the 5.0 section since you have the 98 K-member and you need 94-95 specs.

 

[stangman]

Thanks alot, Is his car a 94/95 car by chance...Once again thanks for all your help-jeff

yup 95