Hey guys - combo is in my sig. I had a tune done Thursday night - the difference is incredible. No more surging idle, no more rough cold starts - driveability increased 10x. If anyone is on the fence about a tune, I'd recommend it.
If you're in Northeast Ohio I'd also recommend Akron Horsepower. These guys really care about customer cars. I had never been there before and my car (which was really a simple n/a tune) was on the dyno for 5 hours! A LOT of time was spent in the 1-2k rpm range to dial in driveability and throttle response.
The biggest SOTP difference is between 2500-4500 RPM. The two sets of curves are my baseline dyno pull vs. the final tune.
FWIW - I also wanted to say that the tuner saw my torque curve and immediately said, "b-cam, right?" He then went on to tell me that the B-cam and F-cam were his two favorite cams to work with on street cars. I thought that was funny since there are so many b-cam haters on this board.
If you're in Northeast Ohio I'd also recommend Akron Horsepower. These guys really care about customer cars. I had never been there before and my car (which was really a simple n/a tune) was on the dyno for 5 hours! A LOT of time was spent in the 1-2k rpm range to dial in driveability and throttle response.
The biggest SOTP difference is between 2500-4500 RPM. The two sets of curves are my baseline dyno pull vs. the final tune.
FWIW - I also wanted to say that the tuner saw my torque curve and immediately said, "b-cam, right?" He then went on to tell me that the B-cam and F-cam were his two favorite cams to work with on street cars. I thought that was funny since there are so many b-cam haters on this board.