im thinking about doing a diy turbo on a mass air gt and i have a few questions about fuel. i am only planing on like 8 to 10 psi of boost. i was gonna try to use #42 injectors a 290 pump and a rising rate regulator. what do u guys think about that idea? i wanna get it tuned but i dont know anywhere in ohio that does it if any of you do please let me in on it.
turbo help
- Thread starter no_slo_5.0
- Start date
-
Sponsors (?)
millhouse
Founding Member
42# injectors and a single 255 pump should be all you need. Leave the rising rate regulators for the guys running 19# injectors.
95cbr331
New Member
millhouse is correct, with 8-10 psi you should be fine. Just get a standard vacuum referenced regulator. Tuning wise if you cant find a decent tuner.. you could always get a tweecer or something similar and a wideband, which would allow you to get fairly well tuned, but it takes a lot of messing around and some learning.
talladam
Member
If you're in north central ohio, www.crt-performance.com is located in Norwalk. It's just around the corner from the Summit Motorsports Park (formerly Norwalk Raceway Park). Jeff Chambers is the owner and he takes good care of his customers.
Adam
Adam
