turbo help

N

no_slo_5.0

New Member

May 14, 2005

24

0

0

Apr 10, 2008

#1

• Apr 10, 2008

• #1

im thinking about doing a diy turbo on a mass air gt and i have a few questions about fuel. i am only planing on like 8 to 10 psi of boost. i was gonna try to use #42 injectors a 290 pump and a rising rate regulator. what do u guys think about that idea? i wanna get it tuned but i dont know anywhere in ohio that does it if any of you do please let me in on it.

 

millhouse

Founding Member

May 14, 2002

1,985

0

46

Simpsonville, SC

Apr 11, 2008

#2

• Apr 11, 2008

• #2

42# injectors and a single 255 pump should be all you need. Leave the rising rate regulators for the guys running 19# injectors.

 

95cbr331

New Member

Oct 11, 2007

79

0

0

Port Orchard, WA

Apr 11, 2008

#3

• Apr 11, 2008

• #3

millhouse is correct, with 8-10 psi you should be fine. Just get a standard vacuum referenced regulator. Tuning wise if you cant find a decent tuner.. you could always get a tweecer or something similar and a wideband, which would allow you to get fairly well tuned, but it takes a lot of messing around and some learning.

 

talladam

Member

Apr 3, 2007

50

0

6

Monroeville OH

Apr 12, 2008

#4

• Apr 12, 2008

• #4

If you're in north central ohio, www.crt-performance.com is located in Norwalk. It's just around the corner from the Summit Motorsports Park (formerly Norwalk Raceway Park). Jeff Chambers is the owner and he takes good care of his customers.

Adam