Tried to start it these past two days.... When I turn on the key, the fuel pump cycles and everything, I turn to start, everything turns over like normal.... I'm not getting any spark.... My coil is good, I tried two of them now, Green wire on the coil is hooked up to the solid green wire on the TFI, the red wire on the coil is hooked up to PIN 4 on the LA3 computer.... Motor is turning over, pulled cap the rotor is turning.... Check coil wire with voltmeter and it's good, with the key on, I got 3 volts to the coil plug, than I ran the red wire straight to the battary and got 12 volts.... Hooked it up, still no spark.... Than I tried the Green wire with the black stripe, still no spark but when I let go of the key and it goes back to the on position it sparks once.... I'm using an inline spark checker to check for spark.... I'm not sure whats going on here.... Where should the green wire on the coil be hooked up too.... Does anyone have a diagram of the TFI wiring ?? THanks so much guys....