I am almost done rewiring my 68 with the Painless 12 circuit kit and need some help with the Turn signal section. I have traced out most of the wires and want to post my findings to see if I am correct as I am fairly inexperienced in reading electrical diagrams.
White/blue stripe --> Emergency Flasher Switch B+(Brn # 951 in Painless)
Blue/Yellow -->Horn Switch (BLK # 952)
Orange/Blue -->Right Rear Turn Signal (Grn # 948)
Green/Orange--> Left " " (Ylw #949)
White/Blue -->Right Front " " (Blu #925)
Green/White-->Left Front " " (Lt.Blu #926)
But I am not sure to what wire I would connect the Brake switch(I think this goes to Green/Orange) and Turn Signal Switch Flasher B+. I am probably wrong on the White/blue stripe --> Emergency Flasher Switch B+(Brn # 951 in Painless). Thanks in advance for your help.
White/blue stripe --> Emergency Flasher Switch B+(Brn # 951 in Painless)
Blue/Yellow -->Horn Switch (BLK # 952)
Orange/Blue -->Right Rear Turn Signal (Grn # 948)
Green/Orange--> Left " " (Ylw #949)
White/Blue -->Right Front " " (Blu #925)
Green/White-->Left Front " " (Lt.Blu #926)
But I am not sure to what wire I would connect the Brake switch(I think this goes to Green/Orange) and Turn Signal Switch Flasher B+. I am probably wrong on the White/blue stripe --> Emergency Flasher Switch B+(Brn # 951 in Painless). Thanks in advance for your help.