not sure exactly what your trying to do but I would not have my hands up in there unless the battery is disconnected.........I have a car starter so no way...
if your trying to turn the TC you can use a allen wrench if you can see the bolts to turn it......and I used a thick screw driver to push it around until I could get to the next bolt......I've done that the last 3 times of dropping the trans....just get the car off the ground...go to neutral...........
if your trying to turn the TC you can use a allen wrench if you can see the bolts to turn it......and I used a thick screw driver to push it around until I could get to the next bolt......I've done that the last 3 times of dropping the trans....just get the car off the ground...go to neutral...........
if you got a bad TQ,why are you installing a shift kit?a rebuilt stock factory TQ is what,$320-350 w/fluid.while your under there,it would be best to replace the TQ.i know $350 is a lot of cash but,if your TQ goes south,it's going to cost a lot more in time and money if it take's your tranny along with it and that needs rebuilding when the TQ blows.