Tweecer maf curve

[ef200098]

ive got a c&L 76mm draw through maf cal'd for the 30lb injectors. does anyone have or know where i can get a maf curve for the 76 c&l. i know the program comes with the 80mm and the 73mm but no 76. thanks for the help. right now i just have the stock maf curve in there, im going to lean it out a bit because im running rich at cruise and wot.

 

[dstanggt50]

I think you can get them from c&l, but I've heard that getting that info can be difficult.

 

[blksn955.o]

Have you looked into the eec annalizer program? The reason I am saying this is even if you get a C&L 76mm curve they tend to be off still at some points and the E.A. is the greatest help in getting a curve to work correctly or even make one from scratch.

I remember seeing people who even had Pro-M units that come with flow sheets needing to tweec the curve in a few spots to get it perfect.

 

[ef200098]

i understand that nothing i am given is going to meet my needs exactly. but it would be nice to have a baseline.

mike

 

[blksn955.o]

Let me look tonight on my laptop and see if I have anything for the 76.

 

[final5-0]

You can look at the files section on the yahoo site.
http://groups.yahoo.com/group/tweecer

It seems to me Clint might have some C&L curves on his site.
http://eecanalyzer.webhop.net/

Just check all the tuning sites, lol.

Later
Grady

 

[DJHA90]

I think you can get them from c&l, but I've heard that getting that info can be difficult.

I sent them a fax asking for the #s for a 76mm for 24# injectors. They faxed a chart back the same day