twin turbo deq i just want to cry =(

mustang863

Member

May 30, 2009

112

9

16

Aug 14, 2011

#1

• Aug 14, 2011

• #1

ok my car

1992 mustang lx stock 5.0 5-speed car
now funn stuff

306 gt40 topend
twin t/4 turbos only pushing 5psi
42lb in fuel inj
c&l set for 42
stock a9l no tune
no problems ++++ i can go up to 23 psi but i have only went to 12


ok heres the deal i have to do deq when i built the engine i had all stock stuff on with no cats and pass no problem


so who would keep stock stuff ya i sold all it now i have got new old parts back on and the car runs like it has a miss im thinking its the used 19 lb i got



so what im hoping is someone tell me how to mix a deq pass i need it its my every day driver and im going nutts befor i rip all the stuff off i set fuel psi and pass cruse but not idel ples help me

 

Chrome_Rust

Member

Dec 5, 2008

530

1

17

Findlay, Ohio

Aug 14, 2011

#2

• Aug 14, 2011

• #2

I see words, well some are words. But I have no idea what you are saying. Try writing your posts in Microsoft Word. Let it spell and grammar check your posts. Then copy and paste it to here.

Sorry for being a dcik about it, but I know some here will agree...

I want to help. But I don't know what you are asking.

 

Opposedodie

New Member

Jul 31, 2011

121

0

0

Aug 14, 2011

#3

• Aug 14, 2011

• #3

Well.... I am on my forth glass of wine and i almost seen a method to his madness... But by the end I was lost in a whirl of words ... So I got another glass of winne....

 

FastDriver

I was uncomfortably high & wearing a helmet

SN Certified Technician

Sep 5, 2001

6,109

2,726

224

Vass, NC

Aug 14, 2011

#4

• Aug 14, 2011

• #4

lol... define deq, please

 

G

Green 94 5.0

Founding Member

Mar 25, 2002

2,601

12

79

Ft. Lauderdale, FL

Aug 15, 2011

#5

• Aug 15, 2011

• #5

Try posting this again after a few less Heinekens.

Trying to guess here, but.....

You built a motor and dropped it in the car with a turbo setup but you need to pass emissions testing.
You then removed the motor and turbo kit and swapped in a stock motor to pass emissions.
The stock motor will not hold an idle and seems to be running on less than 8 cylinders. You suspect it might be injectors.

If my translation is right, did you swap a stock mass air meter back in? Have you checked all of your vacuum lines? Are all of the harnesses for the injectors and sensors plugged in?

On a side note, running a setup like that with no tune is a good way to destroy your engine, even at 5psi. Going up to 12psi without knowing your A/F ratio is insane. Hope this helped a bit.

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Aug 15, 2011

#6

• Aug 15, 2011

• #6

Green 94 5.0, you either have a working crystal ball or you work for one of those government agencies that only has letters and not a name. My eyes crossed trying to make sense of the post...

 

G

Green 94 5.0

Founding Member

Mar 25, 2002

2,601

12

79

Ft. Lauderdale, FL

Aug 16, 2011

#7

• Aug 16, 2011

• #7

jrichker said:

Green 94 5.0, you either have a working crystal ball or you work for one of those government agencies that only has letters and not a name. My eyes crossed trying to make sense of the post...

Click to expand...

Actually I googled DEQ test and from that I kinda guessed at the rest of what he was attempting to say.

 

B

BYRDPE

Founding Member

Nov 4, 1998

1,556

0

37

Memphis,Tn.

Aug 16, 2011

#8

• Aug 16, 2011

• #8

Green 94 5.0 said:

Actually I googled DEQ test and from that I kinda guessed at the rest of what he was attempting to say.

Click to expand...

wow...you are definitely a stand-up guy for even going through the trouble.

 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Admin Dude

Jan 4, 1985

43,161

21,335

234

Box behind Walmart

Aug 16, 2011

#9

• Aug 16, 2011

• #9

That is one awesome Gibberish to English translator you got there.

 

G

Green 94 5.0

Founding Member

Mar 25, 2002

2,601

12

79

Ft. Lauderdale, FL

Aug 16, 2011

#10

• Aug 16, 2011

• #10

Haha.....just trying to help the guy out. I just wish he would post back to tell me if I was right or not.

 

FastDriver

I was uncomfortably high & wearing a helmet

SN Certified Technician

Sep 5, 2001

6,109

2,726

224

Vass, NC

Aug 16, 2011

#11

• Aug 16, 2011

• #11

Noobz347 said:

That is one awesome Gibberish to English translator you got there.

Click to expand...

I think they got one of those over there on google translate... Did anyone try putting it in there?