U-Joint Leaking?

HISSIN50 said:

How is the pinion seal on the rear end? Fluid can run down the flange and DS and drip off the u-joint.

U-joints themselves use high temp grease, which shouldnt get viscous enough to drip like a fluid.

Good luck.

Click to expand...

HISSIN50 said:

Take a look at the back of the differential where the DS bolts to the diff. See if it's wet at all. Also look at the back of the mufflers and above the differential and DS to see if you see wetness (a pinion seal leak will allow fluid to get flung around as it hits the spinning DS).

Check the U-joints for tightness and issues. If they have a zerk fitting, I'd lube them up.

Good luck.

Click to expand...