Hello everyone, I am a new poster and hope someone out there can help me with my problem.
I own a 67 coupe and recently installed a 9" rearend from a 69 mustang. I am looking for a u-joint to cross between my 67 driveshaft and the 69 yoke. The dimension for the driveshaft side are 3-3/16" with 1-1/16" caps. The yoke side is 3-5/8" with 1-1/8" caps. The trouble I am running into is finding someone who makes this setup but with the inside C clips. I have exhausted my local dealers and almost all my patience.
There has to be someone who makes this conversion because I have found exactly what I needed but with outside clips. I plan on upgrading my suspension at a later date but would like the u-joint so that I can work out any mechanical kinks and save some money for the suspension upgrades. Any ideas would be much appreciated.
I own a 67 coupe and recently installed a 9" rearend from a 69 mustang. I am looking for a u-joint to cross between my 67 driveshaft and the 69 yoke. The dimension for the driveshaft side are 3-3/16" with 1-1/16" caps. The yoke side is 3-5/8" with 1-1/8" caps. The trouble I am running into is finding someone who makes this setup but with the inside C clips. I have exhausted my local dealers and almost all my patience.
There has to be someone who makes this conversion because I have found exactly what I needed but with outside clips. I plan on upgrading my suspension at a later date but would like the u-joint so that I can work out any mechanical kinks and save some money for the suspension upgrades. Any ideas would be much appreciated.