Hello everyone, I am a new poster and hope someone out there can help me with my problem.
I own a 67 coupe and recently installed a 9" rearend from a 69 mustang. I am looking for a u-joint to cross between my 67 driveshaft and the 69 yoke. The dimension for the driveshaft side are 3-3/16" with 1-1/16" caps. The yoke side is 3-5/8" with 1-1/8" caps. The trouble I am running into is finding someone who makes this setup but with the inside C clips. I have exhausted my local dealers and almost all my patience.
Seems its getting harder and harder to find someone that knows what they are doing in the parts world. 
There has to be someone who makes this conversion because I have found exactly what I needed but with outside clips. I plan on upgrading my suspension at a later date but would like the u-joint so that I can work out any mechanical kinks and save some money for the suspension upgrades. Any ideas would be much appreciated.
I own a 67 coupe and recently installed a 9" rearend from a 69 mustang. I am looking for a u-joint to cross between my 67 driveshaft and the 69 yoke. The dimension for the driveshaft side are 3-3/16" with 1-1/16" caps. The yoke side is 3-5/8" with 1-1/8" caps. The trouble I am running into is finding someone who makes this setup but with the inside C clips. I have exhausted my local dealers and almost all my patience.
Seems its getting harder and harder to find someone that knows what they are doing in the parts world. There has to be someone who makes this conversion because I have found exactly what I needed but with outside clips. I plan on upgrading my suspension at a later date but would like the u-joint so that I can work out any mechanical kinks and save some money for the suspension upgrades. Any ideas would be much appreciated.
